Ceramic coating Carbon Collective Clear Coat Ceramic Lite (250 ml)

Name: Ceramic coating Carbon Collective Clear Coat Ceramic Lite (250 ml)
Brand: Carbon Collective
Price: 59.90 EUR
Availability: InStock

Be the first to rate the product

Add to FavoritesRemove from favourites

easy-to-apply ceramic coating in spray, 250 ml
More about the product

We will help you with your purchase

Use our consulting room
You can return the goods to us within 14 days
Try the product at our store

Ceramic coating Carbon Collective Clear Coat Ceramic Lite (250 ml)

Updated

Description and parameters
Comments0
Evaluation0
Category

Carbon Collective Clear Coat Ceramic Lite ceramic coating

Clear Coat Ceramic Lite ceramic coating was created as the most versatile coating on the market. Offers durable hydrophobic protection improving the finish of paintwork, wheels, glass, plastic trim, PPF, colored foils and carbon. Ceramic Lite bridges the gap between traditional ceramic coating and ceramic sealant. The basic goal of the product was to create something that could be used on almost any surface or substrate, allowing protection on all surfaces with just one product. Originally formulated as a pre-sale protection for some of the world's most exclusive cars, Clear Coat provides a durable and invisible protective layer on matte, satin and gloss finishes for up to 12 months. Clear Coat can be applied outdoors in stable conditions, out of direct sunlight. After application, wait 6 hours before wetting the coating. Ceramic Lite can be used as a stand-alone protective agent or as an addition to existing ceramic coatings, thus extending their life and giving them "new life".

Main features

With proper maintenance, Clear Coat is durable for up to 12 months, up to 8,000 km on average.
Chemically resistant.
Ultra hydrophobic (repels water and dirt).
Curing time 6 hours (before wetting).
Cost effective (up to 25 cars or 25 skins).
Suitable for outdoor application.
Quick, easy application - results like a ceramic coating.
Increased gloss on glossy finishes.
Accentuation of satin and matte surfaces.
Suitable for paintwork, wheels, glass and plastic moldings.
Can be applied to PPF, colored foils and carbon.
Volume 250 ml.

How to use

Never work in direct sunlight.
First, wash the car thoroughly with a good quality car shampoo.
Always decontaminate the paint from flying rust and tar.
If necessary, do a mechanical decontamination of the paint using clay .
You can read the procedure for claying in the article " waxing a car and its preparation ".
After finishing the claying, wash the car again with shampoo, or rinse it with water and dry it thoroughly.
Polish the paint usingDodo Juice Lime Prime - Fine Cut Polish and Pre-wax Cleanser (100 ml) , the procedure can be found again in the article on waxing. This product also degreases the surface of the paint.
Now the varnish is ready for the application of the ceramic coating.
Put on protective rubber gloves before application.
Apply the product to the Microfiber Carbon Collective Speed Applicator .
First, use two full sprays to fill the applicator, then one spray per panel.
Apply to one panel in straight, overlapping lines.
Make sure the coating is spread evenly over the entire panel.
Remove excess immediately (10 to 20 seconds) with a short-pile microfiber cloth.
Repeat the process for maximum durability.
Any residue or smudges can be removed by reapplying, simply reapply to the area and wipe off.
Apply at temperatures above 5 degrees Celsius in a well-ventilated area.
If you find that the Clear Coat cures too quickly, divide larger parts such as hoods and roofs into sections (halves or quarters).
If applying outside, stand with your back to the wind, spray away from the car and spray into the applicator.
Is it hard to remove? You may be applying too much, make sure you are using a closed loop microfiber (not plush).
The subsequent maintenance of the car after the application of ceramics is very simple, it is enough to wash the vehicle with a high-quality shampoo, for example Carbon Collective Lusso 2.0 .

About the brand

Carbon Collective is a small, independent UK company that offers the ultimate detailing products such as ceramic coatings, various detailing products and a wide range of accessories. They started out as product testers, but because they were dissatisfied with the product offering on the market, they started developing their own products. It has been developing and manufacturing products since 2013, focusing on making each product well-formulated, perfectly functional, and easy to use. Development is a step they never rush. All their products are "Created by Detailers, For Detailers". Carbon Collective products are safe to use, often with pH neutral formulations designed to work specifically with ceramic coatings. Each individual product is created to their own specifications through extensive testing and prototyping, undergoing rigorous real-world and laboratory testing prior to production to provide the best formulation, performance and durability. They will not release a product unless it meets their high standard. Carbon Collective products are specially formulated and developed to be the most innovative and effective products on the market.