Ceramic paint protection Infinity Wax Synergy Lite Coating (100 ml)
More about the product
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
Ceramic paint protection Infinity Wax Synergy Lite Coating (100 ml)
The long-awaited Synergy Lite ceramic paint protection is finally here! Lite is a pure ceramic coating, in sprayable form. Comes in a 100ml glass bottle with 2 spray heads. Lite can be applied to any painted surface, including wheels. Its unique paint adhesion properties allow you to remove coating residue up to 15 minutes after initial application, allowing multiple body panels to be applied at once. You will immediately notice the excellent properties of the product, which give the paint a rich depth. It offers excellent filling ability covering minor imperfections, meaning this coating is also suitable for those who do not wish to machine polish their vehicle. It can also be layered as many times as you like within the first hour of application to cover and fill in paint scratches. And he does it very well.
Another unique aspect of Synergy Lite is its curing, once the coating residue is removed the vehicle can be used within 5 minutes! No more "storage indoors for 12 hours" like other coatings. After all, all ceramic coatings need time to fully bond with the surface. In the case of Lite, they injected 2 polymer elements that act as a layer on top of the coating immediately after application. Thanks to them, the surface is instantly hydrophobic and also reduces the likelihood of water stains. These polymers last until the vehicle is washed for the first time, which we recommend no earlier than 7 days after the initial application (the vehicle may get wet during the first 7 days, but must not be shampooed). After a seven-day period without washing, you can wash the vehicle normally with a good quality shampoo, we recommend using a wax-free shampoo such as Pure Shampoo and a good quality active foam such as Wipeout .
Key features of Infinity Wax Synergy Lite Coating (100 ml)
- Spray system suitable for beginners.
- Shelf life 1 year.
- 1 bottle can cover 5 vehicles on average.
- Suitable for paint and wheels.
- Can be layered to help hide damage and scratches.
- Possibility of outdoor or indoor application.
- After a few minutes the car can be used, there is no need to wait 24 hours.
How to use Infinity Wax Synergy Lite Coating (100 ml)
Basic spray application:This application method is great if you are not machine polishing your vehicle and simply need the benefits of a ceramic coating with minimal effort.
- Work in the shade and on a cool body.
- Wash the vehicle thoroughly and ensure that all tar and dirt has been removed from the bodywork.
- It is also recommended to use fly rust remover to aid in chemical decontamination, and you can use clay and ter remover in the process if needed.
- After washing, dry the vehicle with a quality drying towel , this is essential!
- Always open the doors and dry all areas of the vestibule, including under the rear-view mirrors, where residual water may remain.
- Next, take Infinity Wax Synergy Prep Paint Cleaner to ensure complete removal of any residual surfactants. This is essential to ensure a completely clean surface to which the coating will adhere.
- After cleaning the paint, you can spray the product on the bodywork and simply wipe (in a straight line) with a new microfibre cloth, the excess product will simply evaporate.
- Work on only one body panel, or half a panel if working on the hood or roof.
- The preparation of the varnish is the same as for the basic application by spraying.
- To use Synergy Lite, use a foam applicator or application pad.
- Spray the coating 6 - 8 times on the block to prime the new pad surface, then start applying the coating one panel at a time.
- We recommend - DO NOT SPRAY DIRECTLY ON THE VEHICLE!
- Be sure to "hatch" the layer when applying so-called in a cross - up and down and then from side to side, this will ensure a better and more even connection with the surface. Now simply leave for 30 seconds - 5 minutes ideally, but you can leave for up to 15 minutes before removing the remaining coating with a short fiber cloth.
- Once you've covered the entire car, we recommend wiping it down with a plush, seamless microfiber cloth.
- Do not forget that the vehicle must not be washed for 7 days after application (very important)!
The advanced application is almost the same as the basic application, but with the addition of a machine paint correction to ensure optimal results in the appearance and protection of the vehicle. The application and curing time remains the same for the renovated varnish.
- Layering can be done up to 20x with Synergy Lite, which may be desirable if you're trying to hide a deep imperfection that can't be fixed with a machine.
- To layer - simply apply the first layer, then immediately remove it, followed by the second layer, etc.
- It should be left to dry for 1-3 minutes before wiping off.
- Repeat this process until the defect is completely filled.
About the brand
Infinity Wax is a high-tech car cosmetic from the United Kingdom that first appeared in 2013. The concept was conceived by the company's founder, Michael Cipriani. Cipriani is a chemist and petrolhead who designs, long-term tests and also manufactures all Infinity Wax products. Infinity Wax is a highly recognized and respected brand in the detailing community, from which you can expect high standards and maximum functionality. The biggest splash in 2020 was the new Infinity Wax Synergy line, which includes, for example, ultra-quality ceramic wax, one of the best in the world.Catalog number | ICLLITE100 |
Brand | Infinity Wax |
Links | Official web presentation |