Hand torch Unilite IL-SIG1

The Unilite IL-SIG1 has a white control light, a white top light and red, orange and green signal lights. 10 Samsung LEDs on the main body of the light offer two brightness settings. Thanks to the reflector, it emits a wide light and is therefore ideal for detailed inspection work. It has a powerful LED in the head that provides a concentrated beam with a power of 200 lumens. The top part has 6 red LEDs, the middle part has 6 orange LEDs and the bottom part has 6 green LEDs. Color switching capabilities are useful in industrial areas as a way of signaling. The light is controlled by four independent buttons - the top left button controlling the white outputs and cycling through top light, high main, low main and off with a quick press. The red, yellow, and green buttons control their respective colored LEDs, cycling through constant colors. Colors flash on and off with a quick press. White and colored lights cannot be turned on at the same time. Only one color can be turned on at a time. If it is in any mode for more than 3 seconds, another press will disable it.

Battery and charging

The IL-SIG1 has a built-in 4400 mAh rechargeable Li-ion battery that provides up to 4 hours and 30 minutes at the highest setting and is easily charged using the supplied USB charging cable. Simply open the rubber dust cover on the back and connect the cable, then plug the other end of the USB directly into a computer USB port or USB power adapter / car adapter. A red LED lights up to indicate that the battery is charging and turns green when charging is complete. Charging time is approximately 6 to 7 hours. The IL-SIG1 has several hands-free uses - it has a hanging hook, a folding stand and a strong magnet.

Operating modes

• Main light high intensity - 600 lumens: 4 hours and 30 minutes, beam range 52 m.
• Main light low intensity - 300 lumens: 8 hours, beam range 29 m.
• Top light of the flashlight - 200 lumens: 10 hours, beam range 21 m.
• Red / orange / green: lighting time up to 24 hours.