My account

Meguiar's Soft Buff Foam Cutting Disc 6"

correction disc for DA polisher (hard), 6" / 159 mm
More about the product
We will help you with your purchase
Meguiar's Soft Buff Foam Cutting Disc 6"
Updated

Meguiar's Soft Buff Foam Cutting Disc 6"

Meguiar's new disc system makes machine polishing much easier and more efficient. At the same time, it will make it easier for you to choose the right wheel and reduce the number of accessories you need for paint renovation. The DFC6 wheel is designed for use with the MT310 Meguiar's DA polisher and other orbital polishers. This is a so-called "hard" disc designed for paint correction, removal of scratches, heavy oxidation and other large paint defects using abrasive polishes, e.g. G17216 Meguiar's Ultimate Compound or professional M105 Meguiar's Ultra-Cut Compound .

The new Meguiar's Soft Buff Foam Pads have been completely redesigned to give you the best possible results in refinishing and body polishing. The new foam discs are specially designed for use with the DA polisher and thus improve the results achieved when working with them. At the same time, the new design of the used foam significantly lowers the operating temperature, thereby eliminating the risk of paint burning. The special Velcro fastener that attaches the discs to the drivers was developed with an emphasis on maximum polishing efficiency. This unique system prevents unwanted loss of polishing power. Due to vibrations and perpendicular pressure on the wheel, conventional Velcro fasteners can cause play in the connection between the driver and the wheel and thus the loss of the polishing power generated by the polisher. The result is a limited ability to correct and polish the paint.

The Velcro system, with its unique construction, ensures the strength of the connection between the driver and the disc and thus increases the efficiency of machine polishing. Thanks to the Velcro fastener, there are no unwanted clearances and the maximum amount of polishing power is transferred from the polisher to the paint surface. That's why Meguiar's uses this velcro on all their reels and drivers. The new discs have been redesigned based on development with the world's top detailers to provide perfect performance while maintaining the ideal diameters (5" and 6") and at the same time the minimum thickness (only 17.5mm!) that makes the discs rebranded as "discs" .

Note
Carriers can affect the result of paint renovation as well as the used machine polisher, wheel, polishing paste or the application technique itself. If you use a low-quality driver or a driver with an unsuitable Velcro fastener, the result of your work can be negatively affected. Although it is technically possible to use wheels or drivers with regular Velcro, for the reasons described above, we recommend that our customers always use only Meguiar's high-quality wheels and drivers, which will ensure the best possible results for correction, polishing and waxing of the paint.

The advantages of the new Soft Buff discs over the older versions of Meguiar's discs:

  • A completely new material - a completely redesigned foam pushes the boundaries of paint renovation to a hitherto unknown level.
  • Higher correction ability - thanks to the new foam, the correction ability of this disc is significantly higher.
  • Lower working temperature - the innovative form of the materials used reduces the working temperature and thus the risk of paint damage.
  • Minimal risk of creating additional defects - the new foam significantly reduces the risk of creating orbital fog and other small defects.
  • Greater durability - modern technology ensures a longer life of the discs.
  • Smoother operation - the overall smoother slide of the disc during work ensures much easier correction and polishing.
  • Special Velcro fastener - makes polishing and sanding the paint more efficient thanks to the unique design of the fibers.

Technical parameters:

  • Centering diameter: 6" / 150 mm
  • Blade working surface diameter: 6.25" / 159 mm
  • Disc thickness: 17.5 mm
  • Designed for: MT310 Meguiar's DA Polisher and other orbital and DA polishers with matching attachment diameter
  • For use with driver: DBP6

Catalog numberDFC6
BrandMeguiar's
LinksOfficial web presentation

Product comments

Evaluation

Overall rating
100 %
1 customer rated
Rate the product:
ask us
We will only use your data to send you a reply.