Meguiar's Soft Buff Foam Finishing Disc 5"

Meguiar's Soft Buff Foam Finishing Disc 5"

Meguiar's new disc system makes machine polishing much easier and more efficient. At the same time, it will make it easier for you to choose the right wheel and reduce the number of accessories you need for paint renovation. The DFF5 wheel is designed for use with the MT310 Meguiar's DA polisher and other orbital polishers. This is a so-called "finishing" wheel intended for waxing or final polishing of soft varnishes and varnishes prone to the formation of holograms and orbital fog. For waxing, use one of Meguiar's liquid waxes, eg G18216 Meguiar's Ultimate Liquid Wax or professional M2116 Meguiar's Synthetic Sealant 2.0 .

For the final finishing of soft and prone to additional defects, use one of Meguiar's finishing polishes, such as G19216 Meguiar's Ultimate Polish or professional M205 Meguiar's Ultra Finishing Polish . The new Meguiar's Soft Buff Foam Pads have been completely redesigned to give you the best possible results in refinishing and body polishing. The new foam discs are specially designed for use with the DA polisher and improve the results achieved when working with them. At the same time, the new design of the used foam significantly lowers the operating temperature, thereby eliminating the risk of paint burning.

The special Velcro fastener that attaches the discs to the drivers was developed with an emphasis on maximum polishing efficiency. This unique system prevents unwanted loss of polishing power. Due to vibrations and perpendicular pressure on the wheel, conventional Velcro fasteners can cause play in the connection between the driver and the wheel and thus the loss of the polishing power generated by the polisher. The result is a limited ability to correct and polish the paint.

The Velcro system, with its unique construction, ensures the strength of the connection between the driver and the disc and thus increases the efficiency of machine polishing. Thanks to the Velcro fastener, there are no unwanted clearances and the maximum amount of polishing power is transferred from the polisher to the paint surface. That's why Meguiar's uses this velcro on all their reels and drivers. The new discs have been redesigned based on development with the world's top detailers to provide perfect performance while maintaining the ideal diameters (5" and 6") and at the same time the minimum thickness (only 17.5 mm!), thanks to which the discs are rebranded as "discs. "

Note
Carriers can affect the result of paint renovation as well as the used machine polisher, wheel, polishing paste or the application technique itself. If you use a low-quality driver or a driver with an unsuitable Velcro fastener, the result of your work can be negatively affected. Although it is technically possible to use wheels or drivers with regular Velcro, for the reasons described above, we recommend that our customers always use only Meguiar's high-quality wheels and drivers, which will ensure the best possible results for correction, polishing and waxing of the paint.

The advantages of the new Soft Buff discs over the older versions of Meguiar's discs:

• A completely new material - a completely redesigned foam pushes the boundaries of paint renovation to a hitherto unknown level.
• Better "finish" - thanks to the new foam, it is much easier to achieve a deep shine and a perfect finish, and the application of waxes is significantly easier.
• Lower working temperature - the innovative form of the materials used reduces the working temperature and thus the risk of paint damage.
• Significantly lower risk of creating additional defects - the new foam significantly reduces the risk of creating orbital fog and other small defects during the final waxing.
• Greater durability - modern technology ensures a longer life of the discs.
• Smoother operation - the overall smoother slide of the disc during work ensures much easier correction and polishing.
• Special Velcro fastener - makes polishing and sanding the paint more efficient thanks to the unique design of the fibers.

Technical parameters:

• Centering diameter: 5" / 125 mm
• Diameter of the working surface of the disc: 5.5" / 140 mm
• Disc thickness: 17.5 mm
• Designed for: MT310 Meguiar's DA Polisher and other orbital and DA polishers with matching attachment diameter
• For use with driver: DBP5