Mosconi Gladen ATOMO 2 amplifier

Mosconi Gladen ATOMO 2 amplifier

An extremely compact but powerful 2-channel amplifier that won the 2020/2021 EISA Awards best amplifier of the year poll. In the world of car radios where "size matters" more than ever in 2021, the Mosconi Gladen ATOMO 2 has something to say. Rated at 100W RMS into 4 ohms, the Class D amplifier uses a robust aluminum chassis with remarkably small dimensions, meaning it can be hidden virtually anywhere. Together with Mosconi Gladen's ATOMO 1 amplifier and its ATOMO 4|6 DSP for signal control, it enables the creation of a small but powerful system.

Key features of the Mosconi Gladen ATOMO 2 micro amplifier

• Energy class D.
• Power 2 x 100 W RMS.
• Dimensions 86 x 65 x 36 mm.
• Weighs only 275 grams.
• Built-in High/Low adapter with the important Auto Sense function.
• EISA Awards 2020/2021.
• Flexible input configuration.

Catalog number	ATOMO 2
Brand	Mosconi Gladen
Links	Official web presentation
Number of amplifier channelsAmplifiers are divided into: - Monoblocks - 2-channel - 3-channel - 4-channel - 5-channel - 6-channel - multi-channel Each channel is used to power one speaker for the coaxial type, or one side if they are component speakers. Monoblock type amplifiers are mainly used for subwoofers. 2-channel are suitable for both subwoofers and, for example, the front pair of speakers in a car. 3-channel is used for front or rear speakers + subwoofer. 4-channel are used for front + rear speakers or 1 pair of speakers + subwoofer. 6 or 5-channel are used for 2 pairs of speakers + subwoofer, most often. Bridging means connecting the amplifier to a bridge, using the + pole from one channel and the - pole from the other channel. In most cases this is shown as "BRIDGED" on the amplifier.	2
Energy class of the amplifierAmplifiers are divided into two basic classes: analog and digital . Analog amplifiers (A/B) have higher consumption requirements, but usually have a more natural sound. Digital amplifiers (D) have significantly lower consumption and higher efficiency, but the sound may not be as faithful as with classic analog amplifiers.	D
RMS power into 4 ΩRMS power when loading speakers or subwoofer at 4 Ω. RMS power is the constant power of the amplifier and is one of the most important parameters when choosing an amplifier.	2 x 100 / 1 x 220 W
RMS power into 2 ΩRMS power when loading speakers or subwoofer at 2 Ω. RMS power is the constant power of the amplifier and is one of the most important parameters when choosing an amplifier.	2 x 110W
Input sensitivityIn order for the amplifier to perform its function correctly, it requires an input signal of a certain level, which is different for car radios. It is measured in "Volts" (e.g. 2 V, 4 V, etc.) The higher the value at the output of the pre-amplifier, or car radio, the less demands are placed on the power of the amplifier. However, the amplifier must allow this input sensitivity, and for that reason this value is also given for the amplifier.	0.35 - 16 V
High level inputsThe high-level input on the amplifier allows connection directly to the existing speakers in the car without additional purchase of an external high/low adapter. Important equipment in the case of installing an amplifier on an original car radio.	Yes
Automatic on and offThis function allows you to automatically switch on the amplifier.	Yes
Remote control included in the packageSome models of amplifiers also come with wired remote controls in the package, which on one side plug into the amplifier and on the other side you have a potentiometer that you can place anywhere in the cabin. A common place to place the remote control is under the steering wheel. The advantage is the regulation of power, and therefore volume, depending on driving conditions and the mood of the crew in the car.	No
Dimensions of the amplifier	86 x 65 x 34 mm
Mass	275 g