SGM Alpha 2 anti-vibration material
anti-vibration material, 800 x 500 mm, thickness 2 mm, MLF 0.34, weight 3.65 kg/m²
More about the product
More about the product
We will help you with your purchase
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
SGM Alpha 2 anti-vibration material
Anti-vibration material from the second highest model series from SGM, which consists of self-adhesive polymer butyl rubber of the new generation and aluminum foil with a thickness of 100 microns. The film with a square embossment and black lacquer is equipped with a modern print, on the assembly side the material is protected by a siliconized film. The anti-vibration material from the Alpha series stands out especially for its top properties, very high acoustic loss factor (MLF), high adhesion to metal surfaces and stability. An acoustic loss factor of 0.34 units together with a thickness of 2 mm enables a superior ability to avoid vibrations. The biggest difference compared to the Beta series is significantly higher efficiency thanks to the special composition of the material, as well as better adhesion to metal and stronger aluminum foil. Like all SGM anti-vibration materials, Alpha series materials are resistant to water, moisture, oils and have anti-corrosion properties..jpg)
Main properties of SGM Alpha 2 anti-vibration material
- Anti-vibration material with a thickness of 2 mm, which significantly reduces body vibrations and resonances.
- The second highest line from the SGM company, which stands out especially for its high efficiency.
- New generation polymer sealant composition with improved physical properties.
- High adhesion to metal, resistance to water, moisture, oils and anti-corrosion properties.
- Simple installation on all types of surfaces without the need for heating.
- High flexibility of the material for quick and easy application.
- Aluminum foil with a thickness of 100 microns for increased strength of the material.
- A wide area of application for soundproofing all areas of vehicles.
Technical parameters of SGM Alpha 2 material
- Thickness: 2 mm
- Size: 800 x 500 mm
- Weight: 1.46 Kg (3.65 kg / m²)
- Acoustic Loss Factor (MLF): 0.34
- Working temperature range: -40 °C to +120 °C
- Adhesion: 10 N / cm
- Aluminum foil thickness: 100 µ
- Color: black with yellow print
- Price for 1 piece
.jpg)
Where to apply the SGM Alpha 2 anti-vibration material
You can apply the anti-vibration material SGM Alpha 2 almost everywhere where it is necessary to reduce vibrations and resonances. Due to the thickness of 2 mm and the high acoustic loss factor, the material is particularly suitable for areas with medium to moderately high vibration loads. Alpha 2 is ideal, for example, for the outer and inner sheet metal of doors, and it can also be used as the first layer in soundproofing, roofs, mudguards, torpedoes or plastic wheel arches. You can also use the Alpha 2 on the floor, the bottom of the trunk, the wheel arches or the engine compartment, but we recommend choosing anti-vibration material with a thickness of 3 or 4 mm for these areas. The most common uses of anti-vibration material SGM Alpha 2:- Outer door sheet
- Inner door sheet
- The suitcase lid
- Roof
- Torpedo
- Plastic wheel arches
- Space under the rear seats
- The bottom of the trunk
- Front metal wheel arches
- Rear metal wheel arches
- Floor
- Fenders
About SGM damping materials
The Russian company SGM Technology was founded in 2006, and since then it has been one of the leading Russian manufacturers of sound and heat insulation materials for the automotive, shipbuilding, aviation and construction industries. The combination of excellent physical properties of materials and technological methods is the result of the highly efficient performance of the specialized workforce of SGM, which consists of specialists from the best technical universities of Russia. Currently, SGM offers over 200 types of materials that meet the strictest quality and stability standards with certification according to ISO 9001: 2008 and ISO / TS 16949. Long-term cooperation with such giants as Bosch or LG is proof of the highest quality of SGM products, which has long been one of the best on the market today. At the turn of 2019 and 2020, the SGM company presented hi-tech noise-reducing materials from the top Prime series, which in their performance slightly surpass even the premium materials of the market leader in noise reduction from Comfortmat. You can buy the products of both highly competitive manufacturers, who are constantly competing with innovations in the field of vehicle sound deadening, on our e-shop with a guarantee of the most technologically advanced and most effective products of today. Thanks to the official representation of our company for the Czech Republic and Slovakia, you can count on sufficient stock and professional service..jpg)
| Catalog number | SGM ALPHA 2 |
| Brand | SGM |
| Oversized shipment | Yes, |
| Links | Official web presentation |
| Material type | Anti-vibration |
| Thickness | 2 mm |
| Dimension | 800 x 500 mm |
| Weight 1 piece | 1.46 Kg |
| Basis weight | 3.65 kg / m² |
| Acoustic Loss Factor (MLF)The acoustic loss factor (in English, mechanical loss factor) expresses the ability of the material to absorb propagating sound and change the energy of vibrations created by the sound into thermal energy. The theoretical maximum loss factor is 1, which means no vibration. For example, non-sound-proof steel with a thickness of 1 mm has a loss factor of approx. 0.001 at 200 Hz. Therefore, the higher the loss factor, the better. By combining damping materials, it is possible to significantly increase the loss factor to values approaching 1. | 0.34 |
| Adhesion | 10N/cm |
| Aluminium foil | 100 µm |
| Water resistance | Yes |
| Color | Black with yellow print |
| Price for | 1 piece |
| Layer order | 1st layer |
Product comments
Evaluation
ask us