SPL subwoofer Eton FORCE F 12 R
12", 3000 W RMS, 2 x 1 Ω
More about the product
More about the product
We will help you with your purchase
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
SPL subwoofer Eton FORCE F 12 R
A 30 cm subwoofer that you can easily use for very powerful devices or for dB Drag Race competitions. The subwoofer can handle heavy loads and you will be hard-pressed to find a better SPL subwoofer at this price point.Key features of the Eton FORCE F 12 R SPL subwoofer
- The diameter of the oscillating coil is 100 mm.
- Impedance 2 x 1 Ω.
- 2 x 1500 W RMS / 2 x 3000 W max.
- Sandwich membrane made of Kevlar and hardened paper.
- Weight 26 kg.
| Catalog number | FORCE F 12 R |
| Brand | Eton |
| Links | Test in Car&Hifi magazine (German) |
| RMS powerThe RMS power of the subwoofer is the constant power of continuous use of the subwoofer. If the power is exceeded for a longer period of time, irreversible damage may occur, or to burn out the voice coil of the subwoofer. | 3000W |
| ImpedanceImpedance - measurement of electrical resistance. When buying a subwoofer, it is very important that everyone make sure that the impedance matches the amplifier that you are connecting to it. For subwoofers with a double voice coil, we recommend following the information in the advice center! Example: A 2 Ohm subwoofer cannot be connected to an amplifier that is only stable up to 4 Ohms. A 4 Ohm subwoofer can easily be used on an amplifier that is stable up to 2 Ohms. Connecting a 4 Ohm subwoofer to an amplifier that is stable up to 4 Ohms also without problems. The most common subwoofer impedance is 4 Ohm. | 2 x 1 Ω |
| Subwoofer diameterThe diameter of the subwoofer is indicated on the screw holes. The overall outer diameter of the subwoofer is usually 1-2 cm wider, depending on the size category of the subwoofer. For a 30 cm subwoofer, the outer diameter incl. protective rubber 31.8 cm and in the 25 cm subwoofer it is 26.5 cm incl. protective rubbers. | 12" (300mm) |
| Subwoofer mounting depthThe mounting depth of the subwoofer is measured from the bottom edge of the magnet to the bottom edge of the subwoofer's metal or cast basket. | 196 mm |
| Subwoofer voice coil diameterThe larger the diameter of the voice coil, the more load capacity the subwoofer has, in layman's terms. | 100 mm |
| MassSubwoofer weight in kilograms. The weight is usually given net, i.e. without packaging. | 26 kg |
Product comments
Evaluation
ask us