My account

Subwoofer in box Audison APBX 8 DS

8", 250 W RMS, 4 + 4 Ω
More about the product
We will help you with your purchase
Subwoofer in box Audison APBX 8 DS

Subwoofer in box Audison APBX 8 DS

The APBX 8 DS provides the highest power-to-size ratio of subwoofers from Audison and Hertz. The closed box with a volume of 8.5 l and an impedance of 4 + 4 Ω is perfectly tuned for dynamic bass.

The main features of the subwoofer in the Audison APBX 8 DS box

  • Extremely low profile (131 mm).
  • The 2S² design (2 sides / 2 sounds) provides the possibility to choose the position of the subwoofer.
  • Leveling feet with velcro inserts for secure attachment to the carpet.
  • The SSP (Sub Smart Plug) terminal block is equipped with a Plug & Play connector for quick and safe disconnection of the box.
  • Rounded corners allow easy positioning in the trunk of a car.
  • Specially designed basket geometry for long linear projection (9 mm, unidirectional).
  • Diaphragm made of special water-repellent paper with a diameter of 8" with a profile developed using FEM (Finite Element Method) simulation.
  • The package includes a robust metal grille for perfect protection of the subwoofer.
Catalog numberAPBX 8 DS
BrandAudison
LinksOfficial web presentation (English)
RMS powerThe RMS power of the subwoofer is constant power. This is also the performance of continuous use of the subwoofer. If you exceed the power for a longer period of time, irreversible damage or subwoofer voice coil burning! You can tell if the subwoofer is overloaded by the vibration of the subwoofer membrane. 250 W
Max. (maximum performancePeak performance , which the subwoofer can play momentarily (approx. 0.5 s), for example when hitting drums in a song. If the maximum power is exceeded, damage can quickly occur or subwoofer voice coil burning! 500 W
The diameter of the subwoofer in the box200 mm
ImpedanceImpedance - measurement of electrical resistance. When buying a subwoofer, it is very important that everyone make sure that the impedance is compatible with the amplifier that you are connecting to it. For subwoofers with a double voice coil, we recommend following the information in the advice center!

Example:
A 2 Ohm subwoofer cannot be connected to an amplifier that is only stable up to 4 Ohms. A 4 Ohm subwoofer can easily be used with an amplifier that is stable up to 2 Ohms. Connecting a 4 Ohm subwoofer to an amplifier that is stable up to 4 Ohms also without problems. The most common subwoofer impedance is 4 Ohm. Example:
A 2 Ohm subwoofer cannot be connected to an amplifier that is only stable up to 4 Ohms! A 4 Ohm subwoofer can easily be used with an amplifier that is stable up to 2 Ohms. The most common impedance of subwoofers is 1 x 4 Ohm.
4 + 4 Ω
What is the baffle made of?Subwoofer enclosures are usually made of 18-22 mm MDF board or pressed chipboard. Due to its higher strength, MDF board is a better material than ordinary chipboard. MDF
Dimensions of the boxEnclosure dimensions are given as height, width and depth, which is often longer at the bottom edge than at the top, due to the bevel of the rear wall. 377 x 334 x 109 mm
Box weight incl. subwoofer6.22 kg
Beveling of the back wallThe bevel of the back wall is a crucial parameter if you intend to place the subwoofer in the luggage compartment, instead of the back wall of the rear seat. This will save you a few centimeters of space in the trunk of your car. No

Product comments

Evaluation

Overall rating
100 %
1 customer rated
Rate the product:

Product assembly

ask us
We will only use your data to send you a reply.