My account

Tweeters for Mercedes-Benz Gladen One 25 MB

tweeters for Mercedes-Benz C, E, S, GLC, Ø 25 mm, 25 / 40 W, 4 Ω
More about the product
We will help you with your purchase
Tweeters for Mercedes-Benz Gladen One 25 MB

Tweeters for Mercedes-Benz Gladen One 25 MB

Gladen's One Series includes speaker systems that are tailored to specific vehicles in design and sound tuning. The mission of the One series is to achieve a perfect interplay of individual components with the vehicle's factory system. The speakers have the same shape, size and connectors as the factory speakers, which allows for a very easy and quick installation. All speakers of the One series have been tested and optimally tuned not only in Gladen's internal laboratory, but also in the real conditions of individual vehicle models. At the end of development, all loudspeakers underwent numerous parameter and frequency response tests and were finally fine-tuned by Gladen's sound engineers. And that with the sole aim of providing an optimal sound experience with an emphasis on high-quality sound, detail and easy installation in the spirit of Plug & Play.

Main features of the Gladen One 25 BM speakers

  • Tweeters for Mercedes-Benz cars.
  • Same shape, size and connectors as factory speakers for easy installation.
  • Installation without interfering with factory wiring thanks to specific connectors.
  • High sensitivity and impedance of 4 Ohms will allow connection to the factory system.
  • Silk dome with a diameter of 25 mm, neodymium magnet.

Gladen ONE 25MB compatibility

  • class C (2014 - 2021) - front door
  • class E (2016 - 2022) - front door
  • class S (2014 - 2020) - front door
  • GLC class (2015 - 2022) - front door
Catalog numberONE 25 MB
BrandHappy
LinksOfficial web presentation
Speaker typeCoaxial speakers:
Coaxial speakers are characterized by a so-called all-in-one design. The tweeter and mid-bass speaker are in one basket. The advantage is simpler assembly, but thanks to the connection or proximity of the bands in one speaker, the sound quality will usually be reduced. As a rule, in the middle of the mid-bass speaker, there is a tweeter whose voice coil works in the second air gap of the common magnetic circuit. The three-way coaxial speaker consists of a mid-bass speaker, a center speaker and a separate tweeter in the front on a special beam.

Component Speakers:
Component speakers are characterized by a division into individual frequency bands, treble + mid-bass + or. bass band. The individual speakers can be placed completely separately, which results in a better sound and acoustic performance. In the vast majority of cases of component speakers, an external crossover is also supplied, which divides the treble, middle / mid-bass, and into the three-band the bass band or allows setting the decibel level of the tweeter (e.g. +2 dB, 0 dB, -2 dB), steepness (e.g. 6dB/Oct. 12dB/Oct.) or active or bi-amp connection.
High rise
RMS powerRMS speaker power is the constant power of the entire system, not just one speaker or one side. This is also the performance of continuous use of the speakers. If the RMS power is exceeded for a long time, the speakers may be irreversibly damaged! 25 W
Max. (maximum performancePeak performance , which the speaker can play for a moment (approx. 0.5 s), for example when hitting drums in a song. If the max power is exceeded, the speakers will usually be damaged! 40 W
ImpedanceImpedance - measurement of electrical resistance. When buying speakers, it is important to make sure that the impedance matches the amplifier or car stereo you are using.

Example:
A 2 Ohm speaker cannot be connected to an amplifier that is only stable up to 4 Ohms! A 4 Ohm speaker can easily be used with an amplifier that is stable up to 2 Ohms. The most common speaker impedance today is 3 - 4 Ohm.
4 Ω
Tweeter dome diameterThe net diameter of the dome (diaphragm) of the tweeter. 25 mm
Tweeter dome materialThe shell material that was used in the manufacture of the tweeter. Silk
Frequency crossover included in the packageThe crossover is an important part of defacto all loudspeakers. A crossover usually contains different resistor values, coil sizes, and capacitor types that fundamentally modify the sound. We describe below what the turnouts are for.

Component Speakers:
A crossover is part of every quality component speaker system. Its task is to ensure the distribution of frequencies that the amplifier produces in the entire acoustic spectrum of frequencies so that each of the speakers receives only that part of the band that it can optimally play in terms of efficiency and minimal distortion.

Coaxial speakers:
In most cases, coaxial loudspeakers have a simple crossover (6dB/Oct.) formed by a capacitor at the tweeter.
Yes (capacitor)
Cover grids included in the packageOriginal cover grilles in speaker packaging. Yes
Price forIf the price is for a pair, the package always includes 2 pieces of everything, e.g. 2x mid-bass, 2x tweeter and 2x crossover. Few

Product comments

Evaluation

Overall rating
0 %
No one has rated the product yet
Rate the product:
ask us
We will only use your data to send you a reply.