Tweeters STEG NT-33
tweeters, Ø 33 mm dome, 100 W RMS, 105 dB (2.83 V/1 m), 4 Ω
More about the product
More about the product
We will help you with your purchase
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
Tweeters STEG NT-33
STEG NT-33 tweeters, handmade in Italy, with 100W RMS power and 105dB SPL sensitivity. High-quality PA tweeters that, in addition to being extremely loud, also offer a controlled and high-quality sound. They feature a neodymium magnet and their own small sound box.
| Catalog number | NT-33 |
| Brand | Steg |
| Links | Official web presentation |
| Speaker typeCoaxial speakers: Coaxial speakers are characterized by a so-called all-in-one design. The tweeter and mid-bass speaker are in one basket. The advantage is simpler assembly, but thanks to the connection or proximity of the bands in one speaker, the sound quality will usually be reduced. As a rule, in the middle of the mid-bass speaker, there is a tweeter whose voice coil works in the second air gap of the common magnetic circuit. The three-way coaxial speaker consists of a mid-bass speaker, a center speaker and a separate tweeter in the front on a special beam. Component Speakers: Component speakers are characterized by a division into individual frequency bands, treble + mid-bass + or. bass band. The individual speakers can be placed completely separately, which results in a better sound and acoustic performance. In the vast majority of cases of component speakers, an external crossover is also supplied, which divides the treble, middle / mid-bass, and into the three-band the bass band or allows setting the decibel level of the tweeter (e.g. +2 dB, 0 dB, -2 dB), steepness (e.g. 6dB/Oct. 12dB/Oct.) or active or bi-amp connection. | High rise |
| RMS powerRMS speaker power is the constant power of the entire system, not just one speaker or one side. This is also the performance of continuous use of the speakers. If the RMS power is exceeded for a long time, the speakers may be irreversibly damaged! | 100W |
| Sensitivity (SPL 2.83V/1m)Sensitivity, sensitivity or efficiency of the speaker. Speaker sensitivity is given in decibels (dB) and simply put, the higher the value, the lower the demands on the amplifier's power. This is a defacto rating of how a speaker converts watts to sound. Sensitivity ratings are in noise level measured at 1 meter from the speaker using 1 W (watt of power) or using 2.83 volts at the source at 1 meter. A higher decibel level means the speaker is louder with less power. For every 3 dB increase in sensitivity, the speaker requires half the power to reproduce the same volume. For example, if an 88 dB speaker needs 100 Watts to produce a certain volume, then a speaker with a sensitivity of 91 dB needs only 50 Watts to reach the same volume. | 105 dB |
| ImpedanceImpedance - measurement of electrical resistance. When buying speakers, it is important to make sure that the impedance matches the amplifier or car stereo you are using. Example: A 2 Ohm speaker cannot be connected to an amplifier that is only stable up to 4 Ohms! A 4 Ohm speaker can easily be used with an amplifier that is stable up to 2 Ohms. The most common speaker impedance today is 3 - 4 Ohm. | 4 Ω |
| Tweeter dome diameterThe net diameter of the dome (diaphragm) of the tweeter. | 33 mm |
| Frequency crossover included in the packageThe crossover is an important part of defacto all loudspeakers. A crossover usually contains different resistor values, coil sizes, and capacitor types that fundamentally modify the sound. We describe below what the turnouts are for. Component Speakers: A crossover is part of every quality component speaker system. Its task is to ensure the distribution of frequencies that the amplifier produces in the entire acoustic spectrum of frequencies so that each of the speakers receives only that part of the band that it can optimally play in terms of efficiency and minimal distortion. Coaxial speakers: In most cases, coaxial loudspeakers have a simple crossover (6dB/Oct.) formed by a capacitor at the tweeter. | No |
| Price forIf the price is for a pair, the package always includes 2 pieces of everything, e.g. 2x mid-bass, 2x tweeter and 2x crossover. | Few |
Product comments
Evaluation
You might also be interested
STITCH SQ 32
Quick previewtweeters, Ø 32 mm dome, 70 W RMS, 95 dB (2.83 V/1 m), 6 Ω112,00 EURIn stockSTITCH MA32A
Quick previewOEM tweeters for Audi160,00 EURIn stockSTITCH MA32Q
Quick previewOEM tweeters for Audi160,00 EURIn stockSTITCH LQ 25
Quick previewtweeters, Ø 25 mm dome, 25 W RMS, 90 dB (2.83 V/1 m), 4 Ω87,00 EURIn stockSTITCH SQ 25
Quick previewtweeters, Ø 25 mm dome, 50 W RMS, 90 dB (2.83 V/1 m), 6 Ω99,00 EURIn stockSTEG NT-25
Quick previewtweeters, Ø 25 mm domes, 80 W RMS, 105 dB (2.83 V/1 m), 4 Ω140,00 EURWe usually stock in 1-14 daysSTEG BM25
Quick previewtweeters, Ø 25 mm dome, 25 W, 94 dB (2.83 V/1 m), 4 Ω100,00 EURIn stockSTITCH BZ25
Quick previewtweeters, Ø 25 mm dome, 25 W RMS, 94 dB (2.83 V/1 m), 4 Ω100,00 EURIn stockSTITCH MA25
Quick previewOEM tweeters for Audi120,00 EURIn stock
Quick previewtweeters, Ø 32 mm dome, 70 W RMS, 95 dB (2.83 V/1 m), 6 Ω112,00 EURIn stockSTITCH MA32AQuick previewOEM tweeters for Audi160,00 EURIn stockSTITCH MA32QQuick previewOEM tweeters for Audi160,00 EURIn stockSTITCH LQ 25Quick previewtweeters, Ø 25 mm dome, 25 W RMS, 90 dB (2.83 V/1 m), 4 Ω87,00 EURIn stockSTITCH SQ 25Quick previewtweeters, Ø 25 mm dome, 50 W RMS, 90 dB (2.83 V/1 m), 6 Ω99,00 EURIn stockSTEG NT-25Quick previewtweeters, Ø 25 mm domes, 80 W RMS, 105 dB (2.83 V/1 m), 4 Ω140,00 EURWe usually stock in 1-14 daysSTEG BM25Quick previewtweeters, Ø 25 mm dome, 25 W, 94 dB (2.83 V/1 m), 4 Ω100,00 EURIn stockSTITCH BZ25Quick previewtweeters, Ø 25 mm dome, 25 W RMS, 94 dB (2.83 V/1 m), 4 Ω100,00 EURIn stockSTITCH MA25Quick previewOEM tweeters for Audi120,00 EURIn stockask us