My account

Bilt Hamber Auto-Balm Anti-Corrosion Hard Wax (250ml)

special wax preventing corrosion, 250 ml
More about the product
We will help you with your purchase
Bilt Hamber Auto-Balm Anti-Corrosion Hard Wax (250ml)
Updated

Bilt Hamber Auto-Balm Hard Wax

Auto-Balm is a unique product that provides protection and shine to painted surfaces, chrome or aluminum car parts. Bilt Hamber Auto-Balm Solid Wax is the result of thousands of hours of development and testing of a blend of synthesized, corrosion-inhibiting molecules that can bond tightly, allowing them to remain functional even in a very thin layer. Auto-Balm hard wax can seal the pores in the paint and provide an effective barrier against corrosion. Auto-Balm can also protect chrome, aluminum and other alloys. Auto-Balm does not contain abrasives. If your car's paintwork is in poor condition, then the paintwork needs to be polished and cleaned before waxing or applying sealant. The package also includes 1 Bilt Hamber applicator and a Bilt Hamber microfiber cloth . Does not produce any dust or powder when sanding. Prevents further spread of corrosion from peeled or damaged areas.

Comparison of waxes

Common car waxes or polishes are mostly based on natural hard wax, such as carnauba or montan wax. Synthetic silicones, resins or sealants are also widely used, with or without waxes. After careful polishing, a very thin layer remains on the paint, which provides only weak protection. Bilt Hamber Auto-Balm is applied in a thin layer and after polishing with a cloth it creates a beautiful and deep shine with a wet effect, thanks to which your car will "rejuvenate". It mainly provides excellent anti-corrosion protection to the paint. It's possible to see how hot salt chamber ASTM B-117 h tested Bilt Hamber Auto-Balm beats conventional waxes. Dozens of positive reviews of Bilt Hamber Auto-Balm .

How to Apply Bilt Hamber Auto-Balm Wax

Bilt Hamber Auto-Balm should not be used without the following guidelines:
  • Wash the vehicle thoroughly, do not use shampoos with wax.
  • Auto-Balm is not an abrasive polish.
  • If the varnish is faded, rough or has not been polished for a long time, it will be necessary to use cleaning and polishing products or Clay before application.
  • Wet the supplied applicator under running cold water.
  • Rinse the applicator - it should be damp.
  • Take a very small amount of wax with the applicator and apply to the vehicle in such a way that the applicator moves evenly - the moisture retained in the applicator will lubricate the surface and thus very little wax consumption will be guaranteed.
  • When you apply Auto-Balm, you should not see water droplets. If so, the applicator is too wet.
  • Apply carefully in circular motions.
  • If the polish is in poor condition, use a larger amount and increase the application pressure using smaller circular motions. This will fill the porous surface and improve the gloss. In these places, it is good to always have the paintwork or damage well cleaned.
  • Make sure the applicator stays clean during application - wash with car shampoo if necessary, rinse thoroughly and wring until damp before continuing.
  • When applying to metals, it is not necessary to moisten.
Catalog numberBH-005
BrandBuilt by Hamber
LinksOfficial web presentation

Product comments

Evaluation

Overall rating
0 %
No one has rated the product yet
Rate the product:
ask us
We will only use your data to send you a reply.