A better product is within reach
Carbon Collective Platinum Paint Ceramic Coating (30 ml)
durable ceramic coating, 7H resistance, 30 ml
More about the product
More about the product
We will help you with your purchase
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
Carbon Collective Platinum Paint Ceramic Coating (30 ml)
Platinum Paint - this is the future in paint protection. This ceramic protection creates a special surface layer that becomes a fully active protective layer of the paint. Protects the paint to a reasonable extent from flying stones, bird droppings, tar, UV radiation and most chemical pollution. It can partially prevent scratches in the paint for up to two years. Unlike ordinary waxes, this ceramic coating has anti-static and self-cleaning properties, which makes subsequent maintenance very easy and does not need to be reapplied or combined with wax or detailer. This is all you need.Key features of Carbon Collective Platinum Paint Ceramic Coating (30ml)
- Ceramic coating durable for up to 2 years.
- Hardness 7H.
- High chemical resistance.
- Can be used for gloss and matte.
- Very easy to apply, apply and wipe off.
- Innovative glass bottle with dropper.
- In the package you will find: 30 ml bottle, instructions, dropper, 1 microfiber applicator.
How to use Carbon Collective Platinum Paint ceramic coating
- Never work in direct sunlight.
- First, wash the car thoroughly with a good quality car shampoo.
- Always decontaminate the paint from flying rust and tar.
- If necessary, perform mechanical decontamination with Clay afterwards.
- You can read the procedure for claying in the article " waxing a car and its preparation ".
- After finishing the claying, wash the car again with shampoo, or rinse it with water and dry it thoroughly.
- Polish the varnish using the Dodo Juice Lime Prime Plus product, the procedure can be found again in the article on waxing. This product degreases the paint surface at the same time.
- Now the varnish is ready for the application of the ceramic coating.
- Put on protective rubber gloves before application.
- Apply the ceramic coating to the application cube to which the application cloth is attached.
- Then apply the ceramic coating to the vehicle's paintwork in a criss-cross motion.
- Always apply the ceramic coating in parts, not on the whole car (e.g. doors or 1/4 hood).
- Allow to dry for 1 to 2 minutes and buff with a short-pile microfiber cloth .
- Use more cloths, we recommend using at least 4 cloths for 1 car, it is important to keep the cloth dry and clean, only then will the result be error-free.
- After 3 to 4 hours you can apply a second layer for even higher resistance.
- After application, we recommend leaving the car ideally in a warm and dry place for 24 hours so that the coating hardens.
- 2 weeks after application, we recommend not washing the car, rain does not affect the coating.
- The subsequent maintenance of the car after the application of ceramics is very simple, it is enough to wash the vehicle with a high-quality shampoo, for example Carbon Collective Lusso 2.0 .
Catalog number | CC-004 |
Brand | Carbon Collective |
Links | Official web presentation |
Product comments
Evaluation
ask us