Ceramic paint protection Aqua Coating 9H Pro (50 ml)

Ceramic paint protection Aqua Coating 9H Pro (50 ml)

Aqua Coating 9H Pro is a high-end ceramic coating developed exclusively for professional and certified detailers. Aqua Coating 9H gives the paint an extreme shine and hydrophobic properties, protects against dirt, chemicals and natural influences and, thanks to the hardness of 9H, minimizes the occurrence of small scratches. All this with a long-term effect with protection for 36 to 48 months. The coating slightly darkens the paint, highlights the colors and highlights the metallic grains. Thanks to its hydrophobic properties, it effectively prevents the accumulation of dirt, which will make car washing and maintenance significantly easier and less frequent. Aqua Coating 9H Pro also stands out for its self-regenerating abilities, which are activated by warm water or air. This restores the ceramic coating and re-heals minor scratches. Available in two pack sizes - 15 ml and 30 ml. Intended for certified detailers only, contact us to purchase.

Main features of Aqua Coating 9H Pro ceramic coating

• Top ceramic protection with self-regenerating capabilities.
• Intended exclusively for certified detailers.
• Long-term protection for 36 to 48 months.
• It gives the paint an extreme shine, smoothness and hydrophobic properties.
• Protects against dirt, UV radiation, chemicals and natural influences
• Thanks to the hardness of 9H, it minimizes the appearance of small scratches.
• It enhances the paint color and gives it a unique shine.
• It also copes well with aggressive chemicals.
• To maximize the effect, the coating can be layered.
• Packaging with a volume of 50 ml.

How to apply Aqua Coating 9H Pro

• Never work in direct sunlight.
• First, wash the car thoroughly with a good quality car shampoo.
• Before applying the ceramic protection, we always recommend decontaminating the varnish.
• After finishing the decontamination, wash the car again with shampoo, or rinse it with water and dry it thoroughly.
• We also recommend polishing the varnish by hand or by machine.
• Before the actual application, the surface must be degreased, for example with ADBL IPA .
• Put on protective rubber gloves before application.
• Place 8 drops of ceramic coating on the application cube with the application cloth attached.
• Then apply the ceramic coating to the vehicle's paintwork in a criss-cross motion.
• Always apply the ceramic coating in parts, not all at once on the whole car, but for example on the doors or 1/4 of the hood.
• Allow to dry for 30 to 60 seconds and buff with a short-pile microfiber cloth .
• Use more cloths, we recommend using up to 4 cloths per car, it is important to keep the cloth dry and clean.
• After application, we recommend leaving the car ideally in a warm and dry place for 24 hours so that the coating hardens.
• 2 weeks after applying the ceramic, we recommend not washing the car and protecting it from adverse conditions for at least a week.
• To maximize the effect, it is possible to apply a second layer of coating after 4 hours.
• After 10 hours, apply Aqua Top Coat , which increases the smoothness of the paint and hydrophobic properties.
• The subsequent maintenance of the car after the application of ceramics is very simple, it is enough to wash the vehicle with a high-quality shampoo.

About the brand

Product comments

Evaluation

• Car cosmetics Car exterior maintenance Paint protection Ceramic protection
• Aqua car cosmetics