Ceramic paint protection Aqua E-Coating (100 ml)
More about the product
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
Ceramic paint protection Aqua E-Coating (100 ml)
Aqua E-Coating is an innovative and technologically advanced ceramic coating with elastomer content. After two years of development and testing, Aqua has introduced this modern paint protection, which, in addition to the standard properties of ceramic protection, adds even higher resistance and superior self-regeneration capabilities. Based on the unique chemical properties of elastomers, E-Coating provides a flexible yet very hard membrane that in many ways surpasses even the most durable ceramic coatings. E-Coating also protects against minor scratches, chemicals and natural influences. Elastomers also provide exceptionally high gloss, hydrophobic properties and a smooth, very slippery surface, making the body much less dirty and a pure pleasure to wash. E-coating can be safely applied to all types of paint, but also to films, wheels, or glass and plastic elements. A properly cured coating does not require any maintenance or renewal apart from washing, and its lifespan is at least 4 years. Available in three pack sizes - 15 ml, 30 ml and 100 ml.
Main features of Aqua E-Coating ceramic coating
- Top ceramic protection with elastomer content.
- Exceptional resistance and hardness surpassing even graphene coatings.
- Excellent self-healing abilities.
- Long-term protection for at least 4 years.
- The cured coating requires no maintenance or renewal apart from washing.
- It gives the paint an extreme shine, smoothness and hydrophobic properties.
- Protects against dirt, UV radiation, chemicals and natural influences.
- Thanks to its high hardness, it minimizes the formation of small scratches.
- It enhances the paint color and gives it a unique shine.
- It also copes well with aggressive chemicals.
- Packaging with a volume of 100 ml.
How to apply Aqua E-Coating ceramic protection (at a temperature above 18 degrees)
- Never work in direct sunlight.
- First, wash the car thoroughly with a good quality car shampoo.
- Before applying the ceramic protection, we always recommend decontaminating the varnish.
- After the decontamination is complete, wash the car again with shampoo, or rinse it with water and dry it thoroughly.
- Both in the case of new and used vehicles, we recommend mechanical paint correction to an extent dependent on the state of wear of the paint.
- Before the actual application, the surface must be degreased, for example with ADBL IPA .
- Put on protective rubber gloves before application.
- When applying above 18 degrees, apply without a suede cloth, only with an applicator.
- Open the product and put a few drops of the coating on the applicator (no suede cloth).
- Always apply the ceramic coating in parts, not all at once on the whole car, but for example on the doors or 1/4 of the hood.
- Apply using the transverse method (horizontal and vertical movements), the applied layer should be wet.
- Re-apply the coating to the same spot using only the applicator without adding any more drops of product.
- After application, immediately start processing the coating - polish it with a microfiber cloth with a short pile.
- Buff the paint to a streak-free shine with the second unused microfiber.
How to apply Aqua E-Coating ceramic protection (at temperatures below 18 degrees)
- Never work in direct sunlight.
- First, wash the car thoroughly with a good quality car shampoo.
- Before applying the ceramic protection, we always recommend decontaminating the varnish.
- After the decontamination is complete, wash the car again with shampoo, or rinse it with water and dry it thoroughly.
- Both in the case of new and used vehicles, we recommend mechanical paint correction to an extent dependent on the state of wear of the paint.
- Before the actual application, the surface must be degreased, for example with ADBL IPA .
- Put on protective rubber gloves before application.
- Open the product and apply a few drops of the coating to the applicator with the included suede cloth.
- Always apply the ceramic coating in parts, not all at once on the whole car, but for example on the doors or 1/4 of the hood.
- Apply using the transverse method (horizontal and vertical movements), the applied layer should be wet.
- Re-apply the coating to the same spot using only the applicator without adding any more drops of product.
- Allow to dry for 30 to 60 seconds and buff with a short-pile microfiber cloth .
- Buff the paint to a streak-free shine with the second unused microfiber.
About the brand
The Aqua company has been operating on the market since 2014 and specializes primarily in ceramic paint protection. However, its founder has been professionally engaged in detailing for a significantly longer period of time. He has also been passing on his experience to other detailers for many years, not only as a moderator of the largest Polish detailing forum, but also as part of specialized training courses that he organizes regularly. Thanks to this, the idea to start producing high-quality car cosmetics, as he says - from a detailer to detailers, originally arose. The high demands of the founder, the constant improvement of the product formula and the desire to show that even Polish products can be of the same quality and especially better than foreign ones, did not remain unanswered for a long time. Currently, Aqua has more than 100 wholesale partners from the ranks of detailing companies, and their number is growing rapidly, not only in Poland, but also abroad. This is mainly due to the quality of Aqua products, affordable prices and, last but not least, an interesting assortment.Catalog number | AQUA E-COATING 100 |
Brand | Aqua |
Links | Official web presentation |