Ceramic skin protection CarPro CQuartz Leather 2.0 (50 ml)
More about the product
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
Ceramic skin protection CarPro CQuartz Leather 2.0 (50 ml)
CarPro CQuartz Leather 2.0 is a highly effective leather protection that provides maximum and perfect protection for leather and plastic surfaces in the car. The innovative "high tech" formula, which was created using the highest quality ingredients, brings a result that is "better than new". The goal of the professionals at CarPro was to develop a product that is soft to the touch, provides extreme protection and incredible durability. CQuartz Leather 2.0 has been designed to resist stains, dust, abrasion from clothing and UV rays for many months. Subsequent maintenance of the car's interior becomes so simple that only a damp microfiber cloth is enough and you're done. CarPro CQuartz Leather 2.0 has been tested against a wide range of chemicals and various elements such as oil, mud, crayons and glue. Surfaces treated with CarPro CQuartz Leather 2.0 will not fade or turn yellow under the influence of strong UV radiation, because the composition of CQuartz Leather 2.0 contains a UV inhibitor that perfectly protects the surface. CarPro CQuartz Leather 2.0 protective coating sets new standards in the care of leather surfaces. It protects the new leather from pollution, prevents possible stains, staining with jeans and even resists markers and glue. The maintenance of leather upholstery treated with CQuartz Leather 2.0 is very easy. The lifetime of CarPro leather protection is 12 to 24 months, it depends on how often you drive the car and how you treat it.
Main features of CarPro CQuartz Leather 2.0 protective coating
- Protects against pollution and staining.
- Highly hydrophobic.
- Repels oils and liquids.
- Extreme level of protection.
- Easy application.
- Very long service life of up to 2 years.
- Highly chemical resistant.
- Resistant to UV radiation.
- Consumption of 5 ml per 1 m².
Package contents
- 1x CQuartz Leather 2.0 product (50 ml).
- 1x application cube.
- 4x suede microfiber cloth, 10 x 10 cm.
- 2x sticker.
How to apply CarPro CQuartz Leather 2.0
- Before applying CQuartz Leather 2.0, thoroughly clean the leather and remove dirt and grease with Gyeon Q2M LeatherCleaner Strong leather cleaner for heavier dirt or Gyeon Q2M LeatherCleaner Mild for lightly soiled surfaces. (No need to use on new cars.)
- Put on a headlamp and protective rubber gloves .
- Shake the bottle a few times.
- Open the bottle, be careful, it's quite difficult, it needs to be taken.
- The round applicator has a pocket for two fingers, put it on.
- Just drop a reasonable amount of product onto the round applicator.
- Drip regularly during application.
- Start rubbing the cover into the seat so that it is everywhere and there is no dry spot!
- You can tell where the coating is applied by the surface becoming slightly shiny, it's obvious. After wiping, a matte is formed.
- Work in sections and within 2, max. 3 minutes, the coating must be wiped off with a microfiber towel with a short pile (e.g. Purestar Speed Polish Multi Towel Gray ).
- For example, one part is the entire seat or backrest, but don't hang around too much, time goes faster when applying.
- It is therefore a good idea to have a watch with you and keep track of the time.
- Do this all over the car, first the dashboard, the steering wheel, the driver's seat, then the passenger, the rear seats and finally the door panels and the armrest.
- If necessary, move the seat forwards or, conversely, backwards, so you can get to all the places better.
- The coating can be layered, but only after 1 to 2 hours, depending on the temperature in the garage.
- At a temperature of 25ºC the coating dries in 60 minutes and at a temperature of 15ºC it dries in two hours.
- For more detailed information, read our detailed articleHow to properly apply CarPro CQuartz 2.0 ceramic coating on a new car .
| Catalog number | CP_111CQL5 |
| Brand | CarPro |
| Links | Official web presentation |
Product comments
Evaluation
You might also be interested
TipQuick previewstrong leather cleaner, 500 ml15,60 EURIn stockDodo Juice Supernatural Leather and Upholstery Brush
UpdatedQuick previewperfect brush for leather and interior20,99 EURIn stockNitrile glove Brela Pro Care - M
TipQuick previewchemically resistant glove, size M, color black, price for 1 piece0,19 EURIn stockNitrile glove Brela Pro Care CDC Grip Nitrile - L
TipQuick previewchemically resistant glove with grips, size L, color black, price for 1 piece0,39 EURIn stockCarbon Collective Revive Foaming Leather Cleaner (200 ml)
TipUpdatedQuick previewcleaner and impregnation of leather and vinyl in one product, 200 ml17,90 EURIn stockCarbon Collective 75mm Microfibre Applicators
UpdatedQuick previewmicrofiber applicators, diameter 75 mm, 2 pcs4,90 EURIn stockGyeon Q2M LeatherBrush
TipQuick previewbrush for leather surfaces4,90 EURIn stockPurestar Speed Polish Multi Towel Grey
TipQuick previewuniversal microfiber cloth, 42 x 35 cm, weight 320 gsm, gray color2,77 EURIn stockGyeon Q2M LeatherCleaner Natural (500 ml)
Quick previewgentle leather cleaner, innovative, for regular cleaning, 500 ml13,90 EURIn stockLeather Expert - Leather Strong Care Kit
-23 %TipQuick previewa set of professional and effective preparations for the care of heavily polluted skin, 200 ml + 250 ml23,99 EUR
-25 %TipQuick previewset of professional and effective skin care products, 1 l + 1 l49,99 EUR