Cleantle Inspire Ceramic Coating (30ml)

Cleantle Inspire ceramic coating

The Inspire ceramic coating has been specially developed for detailers and car care enthusiasts. The application is simple, fast and fun - the end result is stunning! Inspire makes the surface hydrophobic, gives it an amazing shine and slightly darkens it! The coating creates an invisible shield that protects your car from UV rays, bird droppings, acid rain and other weather effects. With the coating applied, it is easier to keep the paint clean. The car washing time is reduced by up to 50% and there is no need to use aggressive chemicals. The addition of graphene and carbon nanofibers significantly improves antistatic (reduces dust attraction), flexibility, UV protection and heat distribution, which increases the coating's resistance to high temperatures!

Coating yield

• 25 to 30 ml for a large car.
• 15 to 20 ml for a medium sized car.
• 5 to 10 ml per set of alloy wheels.
• 5 to 10 ml per glass.
• 10 to 15 ml for tires/rubber parts.

How to apply

• Shake the bottle for at least 30 seconds before use.
• Particles of the ingredient will still be visible during application, but shaking the product will prevent it from settling at the bottom of the bottle. Repeat this step before each application.
• Prepare the surface (paint/rims/windows/plastics/tyres/other rubber elements) - remove all dirt from it - especially tar or iron residue.
• If necessary, polish the paint to remove all imperfections to 100%.
• Degrease the prepared surface with a 50% IPA solution.
• Apply the product in sections (e.g. 40 x 40 cm) in cross, overlapping movements using the enclosed applicator (in the case of tiles, glass, plastics) or the microfiber applicator (in the case of tires and rubber elements).
• Within 1-2 minutes after application, buff the product with a microfiber until streaks are completely removed.
• In the case of glass and plastic elements, remove the excess coating after 1-2 minutes.
• In the case of tires, a lot depends on the model and age of the tires - old tires tend to "soak up" the coating, while new ones require sanding/removal of excess coating after application within approx. 1-2 minutes.

Another recommendation

• Apply ideally in a closed, well-ventilated room.
• Outdoor application is also possible, but it is important not to do it in direct sunlight or strong wind.
• Do not apply coating to hot parts!
• Allow the coating to cure for at least 12 hours. During this time, do not allow interaction with water, rain or other precipitation.
• If the paint gets wet within the first 12 hours, dry the car with a microfiber towel and don't let the water dry on its own.
• For the first 5 to 7 days, we recommend not washing the car with auto chemicals.
• If necessary, rinse the car only with demineralized water.
• Full activation of the coating occurs after 24 hours.
• Use proven detergents - the coating is resistant to detergents in the range of pH 3 to 12.
• Keep the product away from fire!
• Use rubber protective gloves and a mask for application!
• In case of damage to the hydrophobic part of the coating - use Cleantle Ceramic Booster to restore the hydrophobic properties, or apply the coating again.
• To extend the life of the coating, use Cleantle Ceramic Booster once every 10,000 km or once every 6 months.
• To achieve maximum durability, the coating must be properly cleaned and prepared before application.
• The durability of the coating therefore depends on how well you prepare the surface of the paint for application and on further care.
• After applying the coating, it needs to be taken care of: Regular washing with special products Cleantle Daily Shampoo2 , Cleantle Citrus Foam2 and Cleantle Tech Cleaner2 . Remove metal deposits with Cleantle Deiron Man .

About the brand

Product comments

Evaluation

• Car cosmetics Car exterior maintenance Paint protection Ceramic protection
• Cleantle car cosmetics
• Promotional goods and sales Brand car cosmetics on sale