My account

Liquid wipers CarPro FlyBy30 (50 ml)

liquid wipers - efficiency from 45 km/h, lifespan 6-8 months, 50 ml
More about the product
We will help you with your purchase
Liquid wipers CarPro FlyBy30 (50 ml)

Liquid wipers CarPro FlyBy30 (50 ml)

The product CarPro FlyBy30 is referred to as a high-tech ceramic hydrophobic abrasion-resistant coating, or simply liquid wipers with an estimated lifespan of 6 months, which, depending on the inclination of the car's windshield, enables driving without wipers from a speed of 45 km/h. FlyBy30 perfectly resists the mechanical abrasion of the wipers, does not wash off even with aggressive car cleaning products and does not cause the wipers to squeak or bounce. It thus ensures high driving safety and a good view in all weather conditions. In addition, it reduces the susceptibility to the settling of remains of insects, snow, frost and other impurities and facilitates the subsequent cleaning of the glass. We recommend applying twice a year, ideally before and after winter. Consumption per car is approx. 5 ml, depending on the size of the windshield.

Key features of CarPro FlyBy30 liquid wipers

  • Excellent price/life ratio.
  • Trouble-free functionality of wipers after application.
  • The wetting contact angle is 112°.
  • Easy application on windshields or side windows.
  • They work from 45 km/h.

How to apply CarPro liquid wipers

  • Wash the glass with car shampoo and dry.
  • Thoroughly clean the glass with CarPro CeriGlass polishing paste.
  • Degrease the surface with CarPro Eraser and wipe dry with a microfiber cloth.
  • Apply the product with an application microfiber cloth .
  • Put a few drops of FlyBy30 on the applicator and rub it into the glass.
  • We recommend applying in two mutually perpendicular directions, i.e. in a square.
  • After 1-3 minutes, polish off the dried film with a microfiber cloth.
  • At temperatures below 10 °C, wipe off when the surface is slightly sticky.
  • Always apply ideally two coats of CarPro FlyBy30 liquid wipers.
  • Allow each layer to cure for at least 12 hours after application. Avoid contact with water during this time.
  • Curing can be accelerated by heating with a heat gun or an IR emitter.
Catalog numberCP_1185
BrandCarPro
LinksOfficial web presentation

Product comments

Evaluation

Overall rating
65 %
4 customers rated
Rate the product:
ask us
We will only use your data to send you a reply.