Meguiar's bucket lid

Meguiar's bucket lid

Do you want to bring your own water at a temperature that suits you and perhaps with mixed shampoo to wash your car? Tired of filling the bucket with water when the water sprays everywhere due to the strong current? Then we have a genius solution! Meguiar's bucket lid to keep the bucket tightly closed. Thanks to the lid, you can bring a bucket filled with your own water to the hand car wash and you don't have to worry about spilling water in the car during transport. The lid fits snugly over the top edge of the yellow Meguiar's bucket and seals it tightly so water won't splash out and dirty or wet the interior or trunk of your car during transport.

This great tool will also help keep the bucket dust-free if you store it, for example, in the garage between washes. You can enclose the necessary accessories that you use to wash your car in the bucket. The lid is made of a strong and flexible black plastic and is adapted for use with the yellow Meguiar's bucket, but it will work just as well with the older, black version of the Meguiar's bucket. Securely close your bucket with the Meguiar's lid so that no inconvenience will ever happen again during its transport!

Tips for washing your car

• Careless washing is the main source of paint damage. Improper hand washing, or visiting gantry/brush car washes, will inevitably result in scratches and damage to your car's paintwork.
• Always wash in such a way as to eliminate the risk of damaging your car's paintwork.
• Always use only your own proven shampoo, not over-the-counter shampoos whose origin is unknown to you and whose washing properties have not been carefully verified.
• Do not use dishwashing detergents, household detergents, all non-contact or active cleaners and foams, degreasers, solvents and other detergents. These cleaners are not gentle on the protective wax layer and polishing oils on your car's paint surface. They dry out the paint and leave it exposed and without any protection. Unprotected paint will begin to degrade very soon on the surface, its oxidation and loss of gloss will begin to show, it is very dangerously exposed to the adverse effects of the surrounding environment and is significantly more susceptible to mechanical and chemical damage.
• The water you wash your car with should be as close to body temperature as possible.
• Use the two-bucket method or a Meguiar's bucket with a Grit Guard liner .
• Do not use foam sponges or gloves with large braided fibers. These sponges and gloves cannot effectively absorb dirt and you can scratch the paint by using them. Use only a gentle washing glove with very fine bristles made of microfiber or natural lamb's wool, which catch small dirt and absorb it.
• Always dry your car after washing. This will prevent the formation of water spots caused by minerals contained in the water. In addition, active drying prevents the redeposition of dust during spontaneous drying.
• For drying, use only the high-quality, extremely absorbent X2000 Meguiar's Water Magnet microfiber drying towel or the top-quality natural chamois X2100 Meguiar's Natural Chamois . Locally, you can dry hard-to-reach places with compressed air (watch out for re-contamination with oil that can spray out of the nozzle). We do not recommend drying with a silicone squeegee, which can catch a grain of dust and scratch the paint.
• Meguiar's shampoo does not need to lather at all when washing and still has all its great properties and is 100% gentle. Always mix the shampoo into the water, moreover, there is no need to lather the shampoo.

Recommended procedure for washing a car

• Rinse your car from loose dirt with pressurized water or a sponge from the bottom up. The lower parts of the car are the most dirty, so when rinsing from the bottom up, the water acts on the dirtiest places for the longest time and thus soaks the dirt for the longest time. In addition, all the dirt from the higher parts flows downwards and thus helps to remove soaked dirt from thresholds, wheels or chassis parts.
• Shampoo the entire body from top to bottom, i.e. from the cleanest parts to the dirtiest.
• Always wash the glove thoroughly when soaking in the bucket to remove any dirt and you haven't put it back on the paint.
• Rinse the shampoo from the body using pressurized water or a sponge from top to bottom. The running water will help you remove the shampoo even from hard-to-reach places.
• Finally, rinse the car once again, slowly from top to bottom, but this time only with a very thin stream of water flowing freely from the hose without the pressure attachment. With this step, up to 80% of the remaining water can be removed from the varnish, making subsequent drying much easier.
• Dry the car with a quality, extremely absorbent X2000 Meguiar's Water Magnet microfibre drying towel or the premium X2100 Meguiar's Natural Chamois chamois .
• If necessary, reinforce the protective wax layer with one of Meguiar's quick waxes.