Meguiar's Super Degreaser (3.78 L)

Meguiar's Super Degreaser (3.78 L)

Meguiar's Super Degreaser excels with perfect cleaning and degreasing capabilities for removing the toughest and most stubborn dirt. It is safe to use on painted surfaces, textiles, plastics, tires and other types of surfaces. In addition, it contains fabric softeners, which ensure the softness and suppleness of fabrics after cleaning, and thanks to a very pleasant perfume, the interior or other cleaned surface and its surroundings will smell good. This product works on the principle of foaming - in the structure of the cleaned surface, when in contact with a brush, brush or cloth, it foams slightly and thus releases dirt from the surface. By subsequent wiping or vacuuming, you will achieve a perfectly clean surface. In addition, its composition prevents re-contamination, which is a frequent shortcoming when using some competing cleaners. Do not use on polished metals without topcoat. Do not let the product dry on the surface!

Recommended procedure for cleaning textiles (e.g. carpets, seat covers, etc.)

• Work in the shade and on a surface that is cool to the touch.
• Shake the product before use.
• First thoroughly vacuum the cleaned surface from loose dirt.
• Spray a small amount of product directly onto the cleaned surface from a distance of approx. 30 cm. Do not wet the surface!
• If you are cleaning stains, apply the product closely directly to the stain to cover it completely.
• Coarse textiles (carpets, etc.) - leave the product on for 30 seconds.
• Delicate textiles (seat covers, door panels , etc. ) - don't wait and continue immediately with the next step.
• Clean the surface of the textile with a gentle brush (e.g. horsehair or nylon). The product foams in the fabric and picks up impurities from deep in the fibers. At the same time, it releases grease and other impurities.
• Wipe the surface of loose dirt with a dry and clean microfiber cloth.
• Vacuum the surface with a liquid vacuum cleaner and free it of cleaner residues and dirt.
• The surface should be only slightly damp after cleaning so that it can dry completely in a short time.
• If necessary, you can repeat the entire procedure. The rule of thumb is that repeating a gentle procedure is better, safer and more effective than a one-time aggressive application.

Recommended engine cleaning procedure - quick / dry cleaning

• Before cleaning, warm up the engine briefly - leave it running for 10 minutes with the hood closed to loosen any coating of dirt and grease.
• Use compressed air or another suitable method to remove leaves and other coarse debris from the engine compartment.
• Shake the product before use.
• Spray a sufficient amount of product directly onto the cleaned surface from a distance of approx. 30 cm.
• Carefully clean the entire surface with a brush with firm but not sharp bristles. You can use, for example, brushes from our offer.
• Afterwards, use two microfibre cloths to wipe off product residues from all surfaces.
• Wipe off dirt with one cloth, wipe dry with the other.
• Do not leave the product on any surface for longer than 30-45 seconds or let it dry!
• If necessary, divide the engine compartment into smaller parts, such as quarters, and work in sections so as not to exceed the time limit of the product's effect.
• Do not use on polished metal surfaces without topcoat!
• Finally, apply a protectant such as D160 Meguiar's All Season Dressing to all cleaned surfaces. This will treat the surfaces after using the degreaser, nourish, protect and give them a luxurious, rich and dark look.
• Spray the dressing on the surface and with a soft brush, e.g. one of our current offer, ho   spread to evenly cover the entire surface.
• Let the dressing dry.
• Wipe off excess with a microfibre cloth to achieve a solid, dark and rich look on all plastic, rubber and metal parts.

Recommended engine cleaning procedure - complete detailing

• Modern engines are designed to withstand moisture. With a suitable procedure, you can easily and effectively clean even a heavily soiled engine compartment.
• Wear safety glasses to prevent cleaners and other chemicals from getting into your eyes.
• Before cleaning, warm up the engine briefly - leave it running for 10 minutes with the hood closed to loosen any coating of dirt and grease.
• Remove with compressed air or another suitable method   leaves and other coarse dirt from the engine compartment.
• Seal with masking tape with a covering film from our offer   around the engine compartment (front bumper, mudguards, front doors) to avoid splattering the surrounding paint with cleaner and other chemicals and dirt from the engine compartment.
• Cover all sensitive electronic parts into which water can penetrate (e.g. exposed sensors, installed electronic devices without the necessary sealing, open air filters, etc.)   before starting cleaning.
• Wrap electronics and open air filters with food film to prevent water and dirt from entering, then reinforce, e.g. with aluminum foil (aluminum foil) and cover with masking tape.
• You can seal the inlets of the air intakes with a microfiber or cotton cloth.
• Shake the product before use.
• Spray a sufficient amount of product directly onto the cleaned surface from a distance of approx. 30 cm.
• Using a brush with firm but not sharp bristles, carefully clean the entire surface, including all corners. You can use, for example, brushes from our offer.
• Rinse the cleaned part with water. We recommend using a spray nozzle on a hose. Using a pressure washer can cause moisture to enter sensitive electronics, and a strong jet of water can mechanically damage some fragile components in the engine compartment!
• Do not leave the product on any surface for longer than 30-45 seconds and do not let it dry!
• If necessary, divide the engine compartment into smaller parts, e.g. quarters and work in sections so as not to exceed the time limit of the product's action!
• Do not use on polished metal surfaces without topcoat!
• Then clean the lower part of the hood using the same procedure. Finally, we recommend washing the hood from the inside using a washing glove and car shampoo to strengthen the shine of the paint and rinsing with water.
• If the hood has textile padding, spray only a small amount of the product on the surface, clean with a gentle brush suitable for textiles and wipe with a microfibre cloth.
• Once again, gently rinse the entire engine compartment from any remaining cleaner.
• Drying   you can do it in two ways:
  • Close the hood, start the engine and let it dry with the heat produced. Uncover all covered engine parts before starting!
  • Dry the engine compartment with compressed air (recommended).
• Unmask the surrounding body parts, expose all engine parts.
• Finally, apply a preservative such as D160 Meguiar's All Season Dressing to all cleaned, non-textile surfaces. This will treat the surfaces after using the degreaser, nourish, protect and give them a luxurious, rich and dark look.
• Spray the dressing onto the surface and spread it with a fine brush, such as one of our current range, to evenly cover the entire surface.
• Let the dressing dry.
• Wipe off excess with a microfibre cloth to achieve a solid, dark and rich look on all plastic, rubber and metal parts.

Recommended procedure for cleaning other parts of the car (front door, wheel arches, tires, etc.)

• Work in the shade and on a surface that is cool to the touch.
• Rinse the surfaces with a hose or pressure washer (vacuum) from all loose dirt.
• Shake the product before use.
• Spray a sufficient amount of product directly onto the cleaned surface from a distance of approx. 30 cm.
• Clean the surface with a brush with firm but not sharp bristles. You can use, for example, brushes from our offer.
• Rinse the preparation from the surface with a stream of water.
• Dry painted surfaces with a drying towel or chamois.
• Apply wax to painted surfaces to restore protection that may have been weakened by degreasing.
• Apply a tire treatment and protection product such as D160 Meguiar's All Season Dressing.

Key features of Meguiar's Super Degreaser (3.78L)

• Extra effective degreaser.
• Fast and extra effective cleaning power for the most stubborn dirt.
• The special composition does not leave any product residue on the surface.
• Pleasant fragrance for easier work.
• Use in the interior and exterior of the car: upholstery, wheel arches, wheels, bodywork, engine, etc.
• Do not use on polished metals without topcoat, LCD displays and touch screens and other sensitive surfaces.
• Do not let it dry on the surface!

Application and dilution methods

• Spray and wipe , 4:1 (heavy soiling), 10:1 (normal soiling)

Paintable, VOC compatible.

Product comments

Evaluation

• Car cosmetics Car exterior maintenance Cleaning and decontamination of paint Paint cleaners
• Car cosmetics Car exterior maintenance Engine maintenance and metal care Engine cleaning
• MEGUIAR'S car cosmetics