My account

Protection and shine for engine parts Meguiar's Engine Dressing (450 ml)

protection and shine for engine parts
More about the product
We will help you with your purchase
Protection and shine for engine parts Meguiar's Engine Dressing (450 ml)
Updated
A better product is within reach

Protection and shine for engine parts Meguiar's Engine Dressing (450 ml)

Do you want to add protection and shine to engine parts made of plastic, rubber or metal? Meguiar's Engine Dressing treats all the parts hidden under the hood of your car. The ideal preparation for long-term protection and a fantastic appearance of the entire engine compartment. Meguiar's Engine Dressing keeps everything under the hood looking new. This dressing safely restores and protects the materials used in the engine compartment and maintains their "new" appearance. The preparation is non-greasy, does not contain solvents dangerous to the skin. Provides long-lasting protection, protects against cracking, fading and hardening of plastics and rubber.

Recommended engine cleaning procedure - quick / dry cleaning

  • Before cleaning, warm up the engine briefly - leave the engine running for 10 minutes with the hood closed to loosen any coating of dirt and grease.
  • Use compressed air or another suitable method to remove leaves and other coarse debris from the engine compartment.
  • Shake engine cleaner such as G148 Meguiar's Engine Cleaner before use.
  • Spray a sufficient amount of product directly onto the cleaned surface from a distance of approx. 30 cm.
  • Carefully clean the entire surface with a brush with firm but not sharp bristles. You can use, for example, brushes from our offer.
  • Afterwards, use two microfibre cloths to wipe off product residues from all surfaces.
  • Wipe off dirt with one cloth, wipe dry with the other.
  • Do not leave the product on any surface for longer than indicated on its label or let it dry!
  • If necessary, divide the engine compartment into smaller parts, such as quarters, and work in sections so as not to exceed the time limit of the product's effect.
  • Do not use on polished metal surfaces without topcoat.
  • Finally, apply protection to all cleaned surfaces. This will treat the surfaces after using the degreaser, nourish, protect and give them a luxurious, rich and dark look.
  • Spray the dressing onto the surface and spread it with a fine brush, such as one from our current offer, so that it covers the entire surface evenly.
  • Let the dressing dry.
  • Wipe off excess with a microfibre cloth to achieve a solid, dark and rich look on all plastic, rubber and metal parts.

Recommended engine cleaning procedure - complete detailing

  • Modern engines are designed to withstand moisture. With a suitable procedure, you can easily and effectively clean even a heavily soiled engine compartment.
  • Wear safety glasses to prevent cleaners and other chemicals from getting into your eyes.
  • Before cleaning, warm up the engine briefly - leave the engine running for 10 minutes with the hood closed to loosen any coating of dirt and grease.
  • Use compressed air or another suitable method to remove leaves and other coarse debris from the engine compartment.
  • Seal the area around the engine compartment (front bumper, mudguards, front doors) with masking tape and a covering film from our offer to prevent the surrounding paint from being stained with cleaner and other chemicals and dirt from the engine compartment.
  • Cover all sensitive electronic parts into which water can penetrate (e.g. exposed sensors, installed electronic devices without the necessary sealing, open air filters, etc.) before starting cleaning.
  • Wrap the electronics and open air filters with food film to prevent water and dirt from entering, then reinforce with e.g. aluminum foil (aluminum foil) and cover with masking tape.
  • You can seal the inlets of the air intakes with a microfiber or cotton cloth.
  • Shake engine cleaner such as G148 Meguiar's Engine Cleaner before use.
  • Spray a sufficient amount of product directly onto the cleaned surface from a distance of approx. 30 cm.
  • Using a brush with firm but not sharp bristles, carefully clean the entire surface, including all corners. You can use, for example, brushes from our offer.
  • Rinse the cleaned part with water. We recommend using a spray nozzle on a hose. Using a pressure washer can cause moisture to enter sensitive electronics, and a strong jet of water can mechanically damage some fragile components in the engine compartment.
  • Do not leave the product on any surface for longer than indicated on its label and do not let it dry!
  • If necessary, divide the engine compartment into smaller parts, such as quarters, and work in sections so as not to exceed the time limit of the product's effect.
  • Do not use on polished metal surfaces without topcoat.
  • Then clean the lower part of the hood using the same procedure. Finally, we recommend washing the hood from the inside using a washing glove and car shampoo to strengthen the shine of the paint and rinsing with water.
  • If the hood has textile padding, spray only a small amount of the product on the surface, clean with a gentle brush suitable for textiles and wipe with a microfibre cloth.
  • Once again, gently rinse the entire engine compartment from any remaining cleaner.
  • Drying   you can do it in two ways:
    • Close the hood, start the engine and let it dry with the heat produced. Before starting, uncover all covered engine parts.
    • Dry the engine compartment with compressed air (recommended).
  • Unmask the surrounding body parts, expose all engine parts.
  • Finally, apply protection to all cleaned, non-textile surfaces. This will treat the surfaces after using the degreaser, nourish, protect and give them a luxurious, rich and dark look.
  • Spray the dressing onto the surface and spread it with a fine brush, such as one of our current range, to evenly cover the entire surface.
  • Let the dressing dry.
  • Wipe off excess with a microfibre cloth to achieve a solid, dark and rich look on all plastic, rubber and metal parts.
Catalog numberG17316
BrandMeguiar's

Product comments

Evaluation

Overall rating
96 %
5 evaluated by customers
Rate the product:
ask us
We will only use your data to send you a reply.