Unilite FL-2 hand torch
More about the product
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
Unilite FL-2 hand torch
The Unilite FL-2 is a compact, high-quality LED flashlight that uses one AA alkaline or NiMH battery to provide a maximum output of 220 lumens on high setting. The high-performance Cree LED emits white light that offers three brightness levels and an 8Hz flashing mode. A switch on the end of the torch cycles through the modes in the order of low, medium, high, strobe with quick half presses and a full press to select the mode. The light can also be turned on and off quickly and cycle through modes, but if it is in any mode for more than 3 seconds, it will go back to high the next time it is turned on and off again. The rubberized microswitch is neon yellow, making the torch easier to see in the dark. Included in the package is a wrist strap to keep it securely on your wrist in case of a fall. The FL-2 is the perfect light for camping, walking the dog or keeping in your bag. The attached case and cord ensure trouble-free carrying of this flashlight.
Operating modes
- Low: 25 lumens, 18 hours, 36m beam range.
- Medium: 95 lumens, 5 hours and 30 minutes, beam range 77 m.
- High: 220 lumens, 2 hours, beam range 117 m.
- Strobe (8 Hz): operating time 3 hours.
Key features of the Unilite FL-2 flashlight
- Uses one AA battery.
- The rubberized limit switch is neon for high visibility.
- Textured reflector for central hotspot and even beam spread.
- Defensive strobe function.
- Submersible up to a depth of 1 m.
- Tested to ANSI / FL1 standard (except strobe) using 1 x AA alkaline non-rechargeable battery.
- Operating modes: low / medium / high / strobe (8 Hz).
- Luminous flux: up to 220 lumens.
- Lamp type: Cree LED.
- Beam range: up to 117 m.
- Battery: 1 x AA alkaline (included) or 1 x AA NiMH.
- Run time: up to 18 hours on low setting.
- Total length: 109 mm.
- Body diameter: 20.8mm.
- Head diameter: 28 mm.
- Weight: 94 g (including battery).
- Body material: aircraft aluminum, die-cast.
- Surface treatment: anodized matte surface.
- Impact resistance: 1 m.
- Environment: waterproof according to the IP67 standard (1 m).
Catalog number | FL-2 |
Brand | Unilite |
Links | Official web presentation |