Eton VW T5 F3.2 speakers
More about the product
- Use our consulting room
- You can return the goods to us within 14 days
- Try the product at our store
Eton VW T5 F3.2 speakers
With the UG VW T5 F3.2 three-way system, the proven and thousands of times installed ETON sound system for VW T5 vans, multivans and motorhomes enters its second generation! The newly developed tweeter and mid-range unit (Plug & Play) has undergone a major upgrade, the enlarged 20 mm fabric tweeter is now covered with an extremely fine touch protection. The result is maximum air flow and a significant improvement in omnidirectional sound. The larger dome achieves higher efficiency and allows for a lower crossover frequency - this is evident in the fine dynamics and high frequency resolution. The newly developed 50 mm midrange speaker with a paper membrane and a powerful neodymium magnet has been equipped with a larger voice coil, so it generates significantly higher sound pressure and is more stable. The new tweeter and midrange speaker are more durable and deliver higher performance in terms of dynamics, fine details and omnidirectional sound. Combined with a large 200mm woofer and mid-range speaker with a proven fiberglass paper diaphragm and 3 ohm impedance, the VW T5 F3.2 is a true gourmet audio upgrade! The powerful ferrite magnet of the woofer and midrange with a polished pole plate provides the necessary driving force and punchy bass, while the large core hole provides the necessary cooling. A precision fit fiberglass reinforced plastic basket can be fitted to the original fixing points and allows the original rubber sound guide to be attached - this ensures optimal 'docking' with the door trim. The kit is equipped with newly tuned, high-quality frequency crossovers and of course also has specific VW connection connectors. The set is easy to assemble and disassemble (e.g. for a leased car, when you need to restore it to its original condition).
Key properties
- 3-way Plug & Play kit for sound enhancement in VW T5.
- 200 mm (8") woofer and midrange driver with double-layer glass fiber paper diaphragm, glass fiber reinforced plastic basket, precision-fit connectors, sealing flange on the back of the basket, extremely strong ferrite magnet with large core and polished pole plate, woofer with durable voice coil and permanent flexible centering for strong bass.
- A newly developed tweeter and mid-range driver unit consisting of an enlarged 20mm fabric tweeter and a 50mm paper tweeter. Mid-range speaker with powerful neodymium magnet and enlarged voice coil, newly designed protection against touch and for significantly greater throughput and improved omnidirectional properties.
- High-quality tweeter/midrange crossovers with level reduction (0dB to -3dB) and wired crossover for the woofer.
- Development and production: Made in Germany.
| Catalog number | VW T5 F3.2 |
| Brand | Eton |
| Links | Official web presentation |
| Speaker typeCoaxial speakers: Coaxial speakers are characterized by a so-called all-in-one design. The tweeter and mid-bass speaker are in one basket. The advantage is simpler assembly, but thanks to the connection or proximity of the bands in one speaker, the sound quality will usually be reduced. As a rule, in the middle of the mid-bass speaker, there is a tweeter whose voice coil works in the second air gap of the common magnetic circuit. The three-way coaxial speaker consists of a mid-bass speaker, a center speaker and a separate tweeter in the front on a special beam. Component Speakers: Component speakers are characterized by a division into individual frequency bands, treble + mid-bass + or. bass band. The individual speakers can be placed completely separately, which results in a better sound and acoustic performance. In the vast majority of cases of component speakers, an external crossover is also supplied, which divides the treble, middle / mid-bass, and into the three-band the bass band or allows setting the decibel level of the tweeter (e.g. +2 dB, 0 dB, -2 dB), steepness (e.g. 6dB/Oct. 12dB/Oct.) or active or bi-amp connection. | Component 3-band |
| RMS powerRMS speaker power is the constant power of the entire system, not just one speaker or one side. This is also the performance of continuous use of the speakers. If the RMS power is exceeded for a long time, the speakers may be irreversibly damaged! | 90 W |
| Sensitivity (SPL 2.83V/1m)Sensitivity, sensitivity or efficiency of the speaker. Speaker sensitivity is given in decibels (dB) and simply put, the higher the value, the lower the demands on the amplifier's power. This is a defacto rating of how a speaker converts watts to sound. Sensitivity ratings are in noise level measured at 1 meter from the speaker using 1 W (watt of power) or using 2.83 volts at the source at 1 meter. A higher decibel level means the speaker is louder with less power. For every 3 dB increase in sensitivity, the speaker requires half the power to reproduce the same volume. For example, if an 88 dB speaker needs 100 Watts to produce a certain volume, then a speaker with a sensitivity of 91 dB needs only 50 Watts to reach the same volume. | 93 dB |
| ImpedanceImpedance - measurement of electrical resistance. When buying speakers, it is important to make sure that the impedance matches the amplifier or car stereo you are using. Example: A 2 Ohm speaker cannot be connected to an amplifier that is only stable up to 4 Ohms! A 4 Ohm speaker can easily be used with an amplifier that is stable up to 2 Ohms. The most common speaker impedance today is 3 - 4 Ohm. | 3 Ω |
| The diameter of the mid-bass speakerWe state the diameter of the speaker as the diameter of the entire speaker, not including the mounts, when smaller speakers (87, 100, 130 mm) have extra mounts. Some speakers are oval and there the dimension is given in inches, always the shortest side to the longest side. One inch is approx. 2.5 cm. | 200 mm |
| Center speaker diameterThe diameter of the center speaker is given as the diameter of a round speaker, not including the mount, where the mounts protrude even more on smaller speakers. | 50 mm |
| Tweeter dome diameterThe net diameter of the dome (diaphragm) of the tweeter. | 19 mm |
| Frequency crossover included in the packageThe crossover is an important part of defacto all loudspeakers. A crossover usually contains different resistor values, coil sizes, and capacitor types that fundamentally modify the sound. We describe below what the turnouts are for. Component Speakers: A crossover is part of every quality component speaker system. Its task is to ensure the distribution of frequencies that the amplifier produces in the entire acoustic spectrum of frequencies so that each of the speakers receives only that part of the band that it can optimally play in terms of efficiency and minimal distortion. Coaxial speakers: In most cases, coaxial loudspeakers have a simple crossover (6dB/Oct.) formed by a capacitor at the tweeter. | Yes |
| Cover grids included in the packageOriginal cover grilles in speaker packaging. | No |
| Price forIf the price is for a pair, the package always includes 2 pieces of everything, e.g. 2x mid-bass, 2x tweeter and 2x crossover. | Few |
Product comments
Evaluation
You might also be interested
Quick previewsound absorbing material, 800 x 500 mm, thickness 20 mm14,90 EURIn stockComfort mat S2
TipQuick previewanti-vibration material, 700 x 500 mm, thickness 2 mm, MLF 0.26, weight 3.23 kg/m²6,38 EURIn stockComfort mat Tsunami
TipQuick previewacoustic sound-absorbing material, 500 x 350 mm, thickness 18 mm, weight 1.22 kg/m²9,99 EURIn stockSpeakers for VW Transporter T5 No. 1
-5 %Quick previewHertz speakers for the front doors of the Volkswagen Transporter T577,70 EUR
-5 %Quick previewGladen speakers for the front doors of the Volkswagen Transporter T5124,50 EUR
-5 %Quick previewHertz speakers for the front doors of the Volkswagen Transporter T5177,50 EUR