Anti-corrosion wax Bilt Hamber Dynax-UC (5 l)

Bilt Hamber DYNAX-UC high-performance anti-corrosion wax

Dynax UC is a high-performance anti-corrosion wax that provides a transparent protective shield with a low film thickness. It is a solid wax whose film is rich in unique metal corrosion inhibitors that cease to exist and thus prevent new corrosion. Dynax UC can be applied to bare metal and painted surfaces, in fact anywhere where strong protection is required. Dynax UC is completely safe for most paints and is ideal where dark waxes or sealants don't look very nice. A dry hard wax film provides mechanical protection. Dynax UC is the ideal product to provide a high level of protection in the winter months - use on underbody, chassis, floors, lift points, chrome, suspension, mounts, wheel arches, aluminum wheels. Possible uses on motorcycles, alloys, aluminum, boats, mowers, machinery, tools and equipment.

Correct use of Bilt Hamber DYNAX-UC wax

• The corrosion inhibitors in Dynax UC can protect clean and corroded steel, but it is a material with a low film thickness.
• Where possible, the applied surface should ideally be 100% clean.
• Clean the surface, wash with water and then dry.
• You can then apply Dynax UC in thin coats, the film thickness should be built up this way rather than a single heavy coat.
• At approximately 50 micrometers dft (dry film thickness), Dynax UC remains virtually transparent.
• The product hardens to its final strength only after 24 - 96 hours, but the vehicle can be used if necessary after only 30 minutes.
• The dried coating is as strong as candle wax and will resist the impact of dirt when fully cured.
• If necessary, Dynax UC can be removed after winter with a suitable degreaser such as Surfex HD .