Homepage

Set of damping materials for Standard doors

(95 assessment)

Add to FavoritesRemove from favourites

set includes 4x Comfortmat S2 + 1x Comfortmat Tsunami
More about the product

We will help you with your purchase

Use our consulting room
You can return the goods to us within 14 days
Try the product at our store

Set of damping materials for Standard doors

-10 %

Updated

Description and parameters
Comments0
Evaluation95
Category

Set of damping material for Standard doors

The use of anti-vibration material on vehicle doors is important not only for improving the acoustics of the speakers, but also for avoiding vibrations and resonances. Anti-vibration materials are also a necessary basis for vehicle noise reduction. The damped door will provide the speakers with ideal conditions for sound reproduction, the bass component and the sound of the mid-bass speaker will be significantly improved. Our Standard door damping kit is suitable for one pair of doors and includes:

4 x anti-vibration material Comfortmat Standard S2
1 x Comfortmat Tsunami acoustic foam

How to apply a set of cushioning materials to a Standard door

First, remove the plastic door panels from the door.
Afterwards, thoroughly clean and degrease the door.
For easy application, we recommend using the Comfortmat Roller .
Apply 1 piece of anti-vibration material Comfortmat Standard S2 to the inner sheet of the door.
Apply 1/2 of the Comfortmat Tsunami acoustic material behind the speaker.
Use 1 piece of Comfortmat Standard S2 material again on the outer sheet.
Put the plastic door panels back on.

Anti-vibration damping material Comfortmat Standard S2

The basic anti-vibration damping material Comfortmat of the Standard series consists of a self-adhesive butyl rubber layer and an aluminum foil with a rectangular pressed structure. The new Standard model series was launched after many years of development in the Comfortmat laboratories with a unique S-Formula composition providing input materials with unique properties that premium materials from competing manufacturers offer. Thanks to the use of purpose-modified elastomer, the cushioning material Comfortmat S2 has a high coefficient of mechanical losses, stands out for its high adhesion to metal, is resistant to water, moisture, oils and extreme temperatures, has anti-corrosion properties and retains the same properties in winter and summer.

Acoustic foam Comfortmat Tsunami

Comfortmat Tsunami is a top-quality acoustic material from the top Expert series, which is primarily intended for car doors. You can use Tsunami mainly to absorb standing waves behind the speaker, which results in a significant improvement in the acoustics of the speakers in the door. Due to its high noise absorption capacity, Tsunami can also be used for overall soundproofing of doors and other surfaces, however, much more effective materials are used for this purpose, which is why we recommend applying Tsunami only directly behind the speaker. Tsunami has the latest generation of modern assembly adhesive sealant developed for the 2018/2019 season, which guarantees the same adhesive effect at temperatures from -50 to +150 degrees. Self-detachment at extreme temperatures and even under water is therefore excluded. The material is made especially for the vertical surfaces of the door, it is 100% waterproof, does not absorb water or moisture, does not rot and does not decompose.

Our tip for the application of soundproofing the door

This set is suitable for ensuring ideal acoustic conditions for speakers in vehicle doors. If you would also like to soundproof the door, we recommend the following procedure. On the inner sheet of the door, use the Comfortmat Standard S2 three-layer anti-noise material Comfortmat Integra as a second layer for the anti-vibration material. Two pieces of this material are needed for two doors. Then proceed according to the instructions above. We also recommend soundproofing the plastic door panels using premium Comfortmat Soft Wave memory foam. The plastics not only provide additional sound insulation, but also prevent unwanted resonances. You use 1 piece of this flexible foam material for one plastic filling.

About Comfortmat cushioning materials

The Comformat company has been operating on the market for over 10 years and during that time has quickly established itself as a leading global manufacturer of anti-vibration and damping materials. Especially in Russia, the country where vehicle sound deadening itself originated, Comfortmat™ damping materials are currently the most used for professional vehicle sound deadening, mainly because of their excellent efficiency. Comfortmat brought new technologies to the automotive industry enabling maximum efficiency, lower material weight, constant efficiency even in extreme temperatures and, last but not least, very easy application. All this was possible only through many years of research in the Comfortmat laboratories, the highest quality control at every stage of production, the modernization of production machines with the involvement of the world's leading experts in the automation of production lines and the creation of a research center equipped with the most modern equipment. Comfortmat's highly qualified experts have extensive scientific and manufacturing experience, regularly perform the necessary physical and mechanical tests, and have expertise in the vibroacoustic properties of cars. Thanks to this, Comfortmat™ products can meet the most demanding requirements of the current automotive market.