Homepage

SGM Air 2 Prime anti-vibration material

(25 assessment)

Add to FavoritesRemove from favourites

anti-vibration material, 800 x 500 mm, thickness 2 mm, MLF 0.34, weight 2.85 kg/m²
More about the product

We will help you with your purchase

Use our consulting room
You can return the goods to us within 14 days
Try the product at our store

Tip

Description and parameters
Comments0
Evaluation25
Category
Assembly

SGM Air 2 Prime anti-vibration material

First-class anti-vibration material from the highest model line Prime from SGM company with extremely low weight. The completely new formula of the rubber compound of this unique anti-vibration material allows it to maintain a high acoustic loss factor (MLF) and stability over a wide temperature range while maintaining a very low weight. The special composition of the rubber compound ensures high adhesion and efficiency of the material, and the viscoplastic structure of SGM Air very effectively dampens body microvibrations. Aluminum foil with a thickness of 100 microns increases the strength and structure of the material, the square embossing and the black lacquer with a modern print will stand out when installed in any car. The material is of course resistant to water and oils, has anti-corrosion properties and maintains the same properties in every season. Like all SGM anti-vibration materials, Prime series materials are resistant to water, moisture, oils and extreme temperatures and have anti-corrosion properties.

The main properties of the SGM Air 2 Prime anti-vibration material

Premium anti-vibration material with a thickness of 2 mm, which significantly reduces body vibrations and resonances.
The highest Prime series from SGM, which stands out especially for its high efficiency.
Extremely low weight thanks to the special composition of the rubber compound.
Composition of putty with a viscous plastic structure for maximum flexibility of the material.
High adhesion to metal, resistance to water, moisture, oils and extreme temperatures and anti-corrosion properties.
Simple installation on all types of surfaces without the need for heating.
High flexibility of the material for quick and easy application.
Aluminum foil with a thickness of 100 microns for increased strength of the material.
A wide area of application for soundproofing all areas of vehicles.

Technical parameters of the SGM Air 2 Prime material

Thickness: 2 mm
Size: 800 x 500 mm
Weight: 1.14 Kg (2.85 kg / m²)
Acoustic Loss Factor (MLF): 0.34
Operating temperature range: -40 °C to +100 °C
Adhesion: 10 N / cm
Aluminum foil thickness: 100 µ
Color: black with purple print
Price for 1 piece

Where to apply the anti-vibration material SGM Air 2 Prime

You can apply the SGM Air 2 Prime anti-vibration material almost anywhere where you need to reduce vibrations and resonances. Due to the thickness of 2 mm and the high acoustic loss factor, the material is particularly suitable for areas with medium and medium-high vibration loads. Due to their very low weight, the anti-vibration materials of the Air Prime series are especially ideal for the outer and inner sheet metal of doors, and they can also be used as the first layer for soundproofing the roof, mudguards, torpedoes or plastic undercarriage. You can also use Air 2 on the floor, the bottom of the trunk, the wheel arches or the engine partition, but we recommend choosing an anti-vibration material with a thickness of 3 or 4 mm for these areas. The most common uses of anti-vibration material SGM Air 2 Prime:

Outer door sheet
Inner door sheet
The suitcase lid
Roof
Torpedo
Plastic wheel arches
Space under the rear seats
The bottom of the trunk
Front metal wheel arches
Rear metal wheel arches
Floor
Central tunnel
Fenders

About SGM damping materials

The Russian company SGM Technology was founded in 2006, and since then it has been one of the leading Russian manufacturers of sound and heat insulation materials for the automotive, shipbuilding, aviation and construction industries. The combination of excellent physical properties of materials and technological methods is the result of the highly efficient performance of the specialized workforce of SGM, which consists of specialists from the best technical universities of Russia. Currently, SGM offers over 200 types of materials that meet the strictest quality and stability standards with certification according to ISO 9001: 2008 and ISO / TS 16949. Long-term cooperation with such giants as Bosch or LG is proof of the highest quality of SGM products, which has long been one of the best on the market today. At the turn of 2019 and 2020, the SGM company presented hi-tech noise-reducing materials from the top Prime series, which in their performance slightly surpass even the premium materials of the market leader in noise reduction from Comfortmat. You can buy the products of both highly competitive manufacturers, who are constantly competing with innovations in the field of vehicle sound deadening, on our e-shop with a guarantee of the most technologically advanced and most effective products of today. Thanks to the official representation of our company for the Czech Republic and Slovakia, you can count on sufficient stock and professional service.

Catalog number	SGM AIR 2 PRIME
Brand	SGM
Oversized shipment	Yes,
Links	Official web presentation
Material type	Anti-vibration
Thickness	2 mm
Dimension	800 x 500 mm
Weight 1 piece	1.14 Kg
Basis weight	2.85 kg / m²
Acoustic Loss Factor (MLF)The acoustic loss factor (in English, mechanical loss factor) expresses the ability of the material to absorb propagating sound and change the energy of vibrations created by the sound into thermal energy. The theoretical maximum loss factor is 1, which means no vibration. For example, non-sound-proof steel with a thickness of 1 mm has a loss factor of approx. 0.001 at 200 Hz. Therefore, the higher the loss factor, the better. By combining damping materials, it is possible to significantly increase the loss factor to values approaching 1.	0.34
Adhesion	10N/cm
Aluminium foil	100 µm
Color	Black with purple print
Price for	1 piece
Layer order	1st layer